Keggning

Cornelius Keg 9L Ball Lock with Rubber Protection (NEW)

Cornelius Keg 9L Ball Lock with Rubber Protection (NEW)

Cornelius keg 9 liter (2.4 gallon) with ball-lock and protective rubber around the ball locks and bottom. Very high quality.Materials: Stainless steel SS304 and rubberHeight: 340 mm (± 2 mm)Diameter: 219 mm (± 2 mm)Weight: 3.7 kg (shipping weight 5.5 kg)Made by A.E.B. In Italy

€131
Cornelius Keg 9L Ball Lock with Rubber Protection (USED)

Cornelius Keg 9L Ball Lock with Rubber Protection (USED)

Cornelius keg 9-liter with ball lock and protective rubber around the ball couplings and at the bottom. High quality from Italy. Material: Stainless steel and rubber.NOTE! Used kegs. The kegs are in very good condition, washed. Delivered pressurized. Minor signs of use may occur. There may be a mark on the barrels and the rubber in the handle may be a little dry and in some cases discolour slightly (rubber preservative or vinyl gloss can remedy this).Please note that looks and design may vary, images are only illustrative.Height: approx. 340 mmDiameter: about 232 mmWeight: about 3.5kg

€85
Volume discount!
€73 per piece when you buy 2 or more
Cornelius Keg 12L Ball Lock with Rubber Protection (NEW)

Cornelius Keg 12L Ball Lock with Rubber Protection (NEW)

Cornelius keg 12 liter (3.2 gallon) with ball-lock and protective rubber around the ball locks and bottom. Very high quality.Materials: Stainless steel SS304 and rubberHeight: 422 mm (± 2 mm)Diameter: 219 mm (± 2 mm)Weight: 4.2 kg (shipping weight 6.5 kg)Made by A.E.B. In Italy

€141
Cornelius Keg 18L Ball Lock with Rubber Protection (USED)

Cornelius Keg 18L Ball Lock with Rubber Protection (USED)

Cornelius keg 18-liter (5 gallons) with ball lock and protective rubber around the ball couplings and at the bottom. High quality from Italy. Material: Stainless steel and rubber.NOTE! Used kegs. The kegs are in very good condition, washed. Delivered pressurized. Minor signs of use may occur. There may be a mark on the barrels and the rubber in the handle may be a little dry and in some cases discolour slightly (rubber preservative or vinyl gloss can remedy this).Note: Keg looks and design may vary, pictures are to illustrate only.Height: approx. 565 mmDiameter: about 232 mmWeight: about 4.5kg

€85
Volume discount!
€73 per piece when you buy 2 or more
Cornelius Keg 23L Ball Lock with Rubber Protection (NEW)

Cornelius Keg 23L Ball Lock with Rubber Protection (NEW)

Cornelius keg 23 liter (6 gallon) with ball-lock and protective rubber around the ball locks and bottom. Very high quality.PPRV (Pressure Release Valve): 7-9 Bars (100-135 PSI)Materials: Stainless steel SS304 and rubberHeight: 670 mm (± 2 mm)Diameter: 228 mm (± 2 mm)Weight: 4.8 kg (shipping weight 10 kg)Made by A.E.B. In Italy

€159
Keg kit Cornelius Keg 9L Ball-Lock (Used)

Keg kit Cornelius Keg 9L Ball-Lock (Used)

A complete barrel kit with gas bottle included. The kit contains the following products:

€233,2
€187
DEAL
Keg kit Cornelius Keg 18L Ball-Lock (Used)

Keg kit Cornelius Keg 18L Ball-Lock (Used)

A complete barrel kit with gas bottle included. The kit contains the following products:

€231,5
€187
DEAL
Isolation Jacket for Cornelius Keg 18-23L

Isolation Jacket for Cornelius Keg 18-23L

Isolation Jacket for Cornelius Keg 18-23L. Neoprene.Note: Cornelius keg is not included.

€26
Temporarily out of stock
Expected in stock: 2024-06-24
View product
Cornelius keg lid

Cornelius keg lid

Standard lid for cornelius kegs.

€18
Mangrove Jack's Mini Keg 3L KIT

Mangrove Jack's Mini Keg 3L KIT

Small keg with quick-connectors for gas and beer. Easy to fit at home in the refrigerator and easy to carry bring on a picnic or party. The lid with valves is provided with built-in safety valve that opens at about 2.5 bar. In this package, Keg, Lid, Lid with quick connectors and pipe in Silicone. Material: Stainless steel Volume: 3 liters Height: 27.5 cm (33 cm incl. quick connector valve) Diameter: 13.5 cm Weight: 950 g Manufacturer: Mangrove Jack's

€94
€85
DEAL
Temporarily out of stock
View product
Mangrove Jack's Mini Keg 5L KIT

Mangrove Jack's Mini Keg 5L KIT

Small keg with quick-connectors for gas and beer. Easy to fit at home in the refrigerator and easy to carry bring on a picnic or party. The lid with valves is provided with built-in safety valve that opens at about 2.5 bar. In this package, Keg, Lid, Lid with quick connectors and pipe in Silicone. Material: Stainless steel Volume: 5 liters Height: 28 cm (33,5 cm incl. quick connector valve) Diameter: 17,5 cm Weight: 1280 g Manufacturer: Mangrove Jack's

€113
€103
DEAL
Temporarily out of stock
View product
Mangrove Jack's Mini Keg 10L KIT

Mangrove Jack's Mini Keg 10L KIT

Small keg with quick-connectors for gas and beer. The lid with valves is provided with built-in safety valve that opens at about 2.5 bar. In this package, Keg, Lid, Lid with quick connectors and pipe in Silicone. Material: Stainless steel Volume: 10 liters Height: 49 cm (54,5 cm incl. quick connector valve) Diameter: 17.5 cm Weight: 1950 g Manufacturer: Mangrove Jack's

€103
Party Keg 5L

Party Keg 5L

A small 5-liter party keg that fits perfectly in your refrigerator and is easy to bring to a party. The keg is used with a separate tap with carbonation capsule. The beer shelf life is several weeks. Volume: 5 liters Height: 25 cm Diameter: 17 cm Can be reused.

€8,3
Temporarily out of stock
View product
Party Keg 5L with tap

Party Keg 5L with tap

A small 5-liter party keg that fits perfectly in your refrigerator and is easy to bring to a party. If you introduse air into the keg, the beer should be consumed within a few days from the keg is opened. The keg can also be used with a separate tap with carbonation capsule. If you serve the beer without introducing beer with the built-in tap, the beer may hold for several weeks. Volume: 5 liters Height: 25 cm Diameter: 17 cm Can be reused.Add rubber plug, se below.

€10
Drip Tray for Party Keg 5L

Drip Tray for Party Keg 5L

Drip tray for Party Keg 5L, black plastic.

€7,4
Temporarily out of stock
View product
Kegmenter Unitank 58L Fermenter/Keg

Kegmenter Unitank 58L Fermenter/Keg

These 29L stainless steel vessels are designed just like a commercial beer keg but with a large 10cm (4inch) tri-clover opening at the top so you can easily get inside the keg to clean it out. This new 29L Size is perfect for doing 20-25L batches so you have a bit of spare head space inside the Kegmenter.This the stainless steel Kegmenter comes with airlock and flat plate however you can also use this kegmenter under pressure if you want to. If you want to use this Kegmenter under pressure then we would recommend that you purchase the lid with ball lock posts and pressure relief vale.The Kegmenter can hold 2.5bar which makes it possible to carbonate and ferment in the same vessel. You can force carbonate using the Pressure Kit (sold seperately).Being able to hold pressure also means you can push the beer out of the fermenter directly through a filter or even dispense directly from fermenter to draft beer tap if you wanted to.SpecificationsVolume: 29L (7.6 Gallons)Maximum Working Pressure: 2.5 BARTest Pressure: 5 BAR Wall Thickness (Body/Chimes): 1.8mm/2.1mmDiameter: 39,5cmHeight: 38cmMaterial: 304 Stainless steelDatasheetClick here to open the datasheet

€280
Kegmenter Unitank 29L Fermenter/Keg

Kegmenter Unitank 29L Fermenter/Keg

These 29L stainless steel vessels are designed just like a commercial beer keg but with a large 10cm (4inch) tri-clover opening at the top so you can easily get inside the keg to clean it out. This new 29L Size is perfect for doing 20-25L batches so you have a bit of spare head space inside the Kegmenter.This the stainless steel Kegmenter comes with airlock and flat plate however you can also use this kegmenter under pressure if you want to. If you want to use this Kegmenter under pressure then we would recommend that you purchase the lid with ball lock posts and pressure relief vale.The Kegmenter can hold 2.5bar which makes it possible to carbonate and ferment in the same vessel. You can force carbonate using the Pressure Kit (sold seperately).Being able to hold pressure also means you can push the beer out of the fermenter directly through a filter or even dispense directly from fermenter to draft beer tap if you wanted to.SpecificationsVolume: 29L (7.6 Gallons)Maximum Working Pressure: 2.5 BARTest Pressure: 5 BAR Wall Thickness (Body/Chimes): 1.8mm/2.1mmDiameter: 39,5cmHeight: 38cmDatasheetClick here to open the datasheet

€224
Hop Filter 29cm

Hop Filter 29cm

Hop filter in stainless steel, perfect for dry hopping beer in Cornelius kegs or fermenters. Loop for hanging it. Length: 29cm. Diameter: 7cm.

€27
CO2 Cylinder 425g (Filled)

CO2 Cylinder 425g (Filled)

A compact Acme threaded (Trapezoidal thread form) CO2 cylinder that works perfect for the homebrewer and the sparkling water enthusiast. With this 425g cylinder you should be able to carbonate 60-80L of beer. Needs a trapets/acme threaded adaptor to be coupled to a regulator.The colour of the cylinder is random.

€21
Trapetz Adaptor CO2

Trapetz Adaptor CO2

Brass trapetz adapter for 425g co2 flasks, for example Sodastream.

€13
Temporarily out of stock
View product
Trapets Adaptor CO2 nickel plated brass (type 2.3)

Trapets Adaptor CO2 nickel plated brass (type 2.3)

This trapets adapter in nickel plated brass allows you to attach 425 g aluminum CO2 cylinders to a CO2 regulator with standard W21.8x1/14" threads.Version 2.3 features a spring pressure screw, that makes it no longer necessary to make adjustments for different brands of CO2 cylinders in most cases.Comes equipped with a safety vent hole to minimize the risk of damaging the gasket when unscrewing it from the CO2 cylinder with remaining pressure.Made in Sweden.

€27
€25
DEAL
Rubber seal for Trapets Adaptor (type 2.3)

Rubber seal for Trapets Adaptor (type 2.3)

Rubber seal for Trapets Adaptor (type 2.3)

€1,8
Temporarily out of stock
View product
CO2 cartridges 8g 10-pack

CO2 cartridges 8g 10-pack

Carbon dioxide cartridges for sodasiphones, cartridges can be used in sodasiphones or along with adapter to mini regulators. CO2 Cartridges 8g 10 pack contains: 10 pcs CO2 cartridges of stainless steel. A cartridge contains 8.4 grams of carbon dioxide gas. (NOTE! Appearance and lable may vary)

€4,6
CO2 cartridges 16g 10-pack

CO2 cartridges 16g 10-pack

Carbon dioxide cartridges for sodasiphones, cartridges can be used in sodasiphones or along with adapter to mini regulators. CO2 Cartridges 16g 10 pack contains: 10 psc CO2 cartridges of steel. A cartridge contains about 16.3 grams of carbon dioxide gas. (Note! Appearance and labeling may vary)

€12
Better Brew S30 Adapter for 8g CO2 cartridge

Better Brew S30 Adapter for 8g CO2 cartridge

Better Brew S30 Adapter for 8g CO2 cartridge

€5,5
Temporarily out of stock
View product
Adapter for 8g CO2 cartridge for siphons

Adapter for 8g CO2 cartridge for siphons

Adapter for 8g CO2 cartridge for siphons

€6,4
Temporarily out of stock
View product
Nitrous Oxide N2O Cartridges 8g 10-pack

Nitrous Oxide N2O Cartridges 8g 10-pack

Nitrous Oxide N2O cartridges for soda siphones, cream siphons can be used in soda siphones or along with adapter to mini regulators. Nitrous Oxide N2O 8g 10-pack contains: 10 pcs cartridges of stainless steel. A cartridge contains 8.4 grams of gas. (NOTE! Appearance and lable may vary)

€7
OxyTurbo Single Regulator (1 clock)

OxyTurbo Single Regulator (1 clock)

OxyTurbo Single Regulator (1 clock)

€61
OxyTurbo Single Regulator (2 clocks)

OxyTurbo Single Regulator (2 clocks)

OxyTurbo Single Regulator 2-clocks

€66
OxyTurbo Double 3-clock Regulator

OxyTurbo Double 3-clock Regulator

OxyTurbo Double 3-clock Regulator

€159
€136
DEAL
Pressure Valve with Manometer 2 Bar

Pressure Valve with Manometer 2 Bar

Adjustable pressure valve with manometer. Can handle pressures up to 2 bar / 30 psi. 1/4" MFL.

€24
Ball Lock Disconnect Barbed Black for Beer

Ball Lock Disconnect Barbed Black for Beer

Self-closing quick disconnect for ball lock cornelius kegs. Black coupling that fits on the liquid post. Barb: 6.5 mm (1/4"). The gas line should be secured with a hose clamp.

€8,3
Volume discount!
€5,5 per piece when you buy 3 or more
Ball Lock Disconnect Threaded 1/4" MFL Black for Beer

Ball Lock Disconnect Threaded 1/4" MFL Black for Beer

Self-closing quick disconnect for ball lock cornelius kegs. Black coupling that fits on the liquid post. Threads: 1/4" MFL (corresponds to 7/16" UNF).

€8,3
Volume discount!
€5,5 per piece when you buy 3 or more
Ball Lock Disconnect Barbed Grey/White for Gas

Ball Lock Disconnect Barbed Grey/White for Gas

Self-closing quick disconnect for ball lock cornelius kegs. Whte/Grey coupling that fits on the gas post. Barb: 6.5 mm (1/4"). The gas line should be secured with a hose clamp.

€8,3
Volume discount!
€5,5 per piece when you buy 3 or more
Ball Lock Disconnect Threaded 1/4" MFL White/Grey for Gas

Ball Lock Disconnect Threaded 1/4" MFL White/Grey for Gas

Self-closing quick disconnect for ball lock cornelius kegs. White/grey coupling that fits on the gas post. Threads: 1/4" MFL (corresponds to 7/16" UNF).

€8,3
Volume discount!
€5,5 per piece when you buy 3 or more
Ball Lock Disconnect Premium Grey Gas

Ball Lock Disconnect Premium Grey Gas

You can now have a check valve integrated into your ball lock disconnect. These clear/grey high quality plastic disconnects are very common in the industry but now have the added feature of having a check valve integrated into the fitting. The internal parts are made from stainless steel and the body is clear so you can see whats inside.With the MFL thread you can attach: - Barb fitting (Swivel Nut & Barb)- 8mm push in fitting- Mini All In One Regulator- Premium Mini Regulator

€13
Flow Control Ball Lock Disconnect - Stainless

Flow Control Ball Lock Disconnect - Stainless

If you want an easy way to balance your beer lines this is the way to do it.  Please be aware that even in the fully open position these FC disconnects do have some inherent flow resistance so you should use either shorter line or larger ID line that you would when compared with traditional ball lock disconnects.  One of the benefits of FC disconnects is you don't need to rely on the small ID or line length to apply flow resistance so it would not make sense to use long lines or small ID lines as well as this is the job of the FC device.This is perfect for people who want to serve a large range of beverages with differing carbonation levels as it gives you the ability to adjust resistance easily.This stainless steel ball lock disconnect is quality machined from stainless steel with MFL thread.  It's ideally used with duotight MFL fittings.

€42
Ball lock Duotight 8mm (5/16") Gas Grey/Red

Ball lock Duotight 8mm (5/16") Gas Grey/Red

Ball coupling with integrated Duotight 8mm (5/16") quick coupling. Ingenious ball coupling from kegland means you don't have to choose between hose clamp or quick coupling with threads. Now there is finally a ball coupling in really good plastic material that better resists chemicals and has a built-in quick coupling.

€10
Ball Lock Beer Duotight 8mm (5/16") with Flow Control (Black/Yellow)

Ball Lock Beer Duotight 8mm (5/16") with Flow Control (Black/Yellow)

Ball lock connector with Flow Control, to adjust resistance easily without the introduction of turbulence which creates foam. With Duotight 8 mm (5/16"). For liquid/beer.

€13
Ball lock Duotight 8mm (5/16") Beer Black/Yellow

Ball lock Duotight 8mm (5/16") Beer Black/Yellow

Ball coupling with integrated Duotight 8mm (5/16") quick coupling. Ingenious ball coupling from kegland means you don't have to choose between hose clamp or quick coupling with threads. Now there is finally a ball coupling in really good plastic material that better resists chemicals and has a built-in quick coupling. For hoses with 8mm outer diameter.

€10
The Home Brewery Restrictor Tubing Kit for cornelius keg 1m

The Home Brewery Restrictor Tubing Kit for cornelius keg 1m

The Home Brewery Restrictor Tubing Kit includes everything from ball-lock fitting to faucet. The thin tubing (1m long) provides a significant pressure drop that allows dispensing heavily carbonated beer without too much foaming.Comes fully assembled. The color and appearance of the tubing may vary. Keg is not included.

€26
Restrictor Tubing Kit for cornelius keg 1m

Restrictor Tubing Kit for cornelius keg 1m

This kit includes everything from ball-lock fitting to faucet. The thin tubing (1m long) provides a significant pressure drop that allows dispensing heavily carbonated beer without too much foaming.Comes fully assembled. The color and appearance of the tubing may vary. Keg is not included.

€27
Temporarily out of stock
View product
Restrictor Tubing Kit (sytrådskit) 2m

Restrictor Tubing Kit (sytrådskit) 2m

This updated kit includes everything from ball-lock fitting to faucet.The thin tubing (3.2 mm inside diameter) provides a significant pressure drop that allows dispensing heavily carbonated beer without too much foaming.In this kit, the thin tubing goes all the way from ball lock disconnect to Picnic Faucet, without the need to add short bits of 3/8" tubing to fit the faucet.The package includes:1x Threaded ball lock disconnect - 1/4" MFL - liquid1x John Guest 3/8" - 1/4" FFL 1x John Guest 3/16" - 3/8" stemabout 2 meters PE tubing 3/16"1x John Guest 1/4’’ - 3/16"1x Picnic Faucet with 1/4" stemComes fully assembled. The color of the tubing may vary.

€30
PE Tubing 3/16" (3,2x4,8mm) Natural - per meter

PE Tubing 3/16" (3,2x4,8mm) Natural - per meter

Polyethylene (LDPE) restrictor tubing with inside diameter 1/8" (3.2 mm) and outside diameter 3/16" (4.8 mm). Provides additional pressure drop to prevent excess foaming.Price per meter.

€1,8
Volume discount!
€1,4 per piece when you buy 5 or more
Picnic Tap with barb

Picnic Tap with barb

A simple plastic tap that attaches directly to the beer line. 7 mm (1/4") barb.

€5,5
Picnic Tap DuoTight with 1/4" straight stem

Picnic Tap DuoTight with 1/4" straight stem

A simple plastic tap with 1/4'' stem that fits directly to 1/4'' Pushfit/John Guest fittings.

€5,5
Kegmenter Pressure Kit

Kegmenter Pressure Kit

This pressure kit is so you can convert the 29 and 58L Kegmenters into either pressure rated fermenters or use the Kegmenters as ball lock kegs. This lid comes with a red pressure relief valve (that opens at 2.5bar - compatible thread to cornelius type PRVs). The lid has accurately machined gas and liquid posts.This lid is ideally suited to also fermenting under pressure so you can use a spunding valve/adjustable pressure relief valve so you can naturally carbonate during primary fermentation.It should be noted that we now make this lid with a 60cm silicon dip tube with a stainless fload. This innovative design means when you draw liquid from this kegmenter the liquid will always be drawn from the top 2.5cm of liquid meaning only the clearest wort/beer will be drawn from the kegmenter. This is particulrly useful if you are dispending directly from the fermenter or simply want to separate clear liquid from sediment which has sunken to the bottom of the kegmenter.

€75
FermZilla Red Plastic Carbonation/Cleaning Cap

FermZilla Red Plastic Carbonation/Cleaning Cap

Fits CO2/Beer Ball-lock-coupling and has 1/4" (6,5mm) stem. Sanitize hoses or force carbonate beer on PET Bottle. Also fits FermZilla. Clean your beer line easy. Attach the cap to a soda bottle with cleaning solution. Liquid and Gas ball lock compatible. Red plastic.

€5,5
FermZilla Stainless Steel Carbonation/Cleaning Cap

FermZilla Stainless Steel Carbonation/Cleaning Cap

Fits CO2/Beer Ball-lock-coupling. Sanitize hoses or force carbonate beer on PET Bottle. Also fits FermZilla. Clean your beer line easy. Attach the cap to a soda bottle with cleaning solution. Liquid and Gas ball lock compatible. Stainless steel.

€18
O-ring for Cornelius Keg Lid

O-ring for Cornelius Keg Lid

O-ring for Cornelius Keg Lid

€1,8
Blowtie Pressure Kit

Blowtie Pressure Kit

Complete Blowtie Pressure Kit, fully assembled and ready to use, for Duotight mm hose. Adjustable Blowtie Spunding Valve for 0-4 bar/0-60 PSI. Easy to adjust precisely. Set the desired venting pressure. Perfect for FermZilla, Kegmenter and Cornelus kegs.

€31
Mangrove Jack's 3-Tap Kegerator

Mangrove Jack's 3-Tap Kegerator

Mangrove Jack´s Kegerator complete with 3 taps. Stainless steel faucets Better balanced beer hoses to reduce foaming. Easy to install beer and gas pipes with push-fit components. Fan cooling system for the crane tower for improved cooling in the tap tower and thus better pouring. Digital thermostat with wide temperature range -2.2 - 27.8 C (26-82 F). Robust MKIII CO2 Regulator. Stainless steel door. Drip tray. Tower fan. Glass shelf and cooling shelves included Stainless steel floor for extra barrel support Mangrove Jack's 3-Tap Kegerator contains: • 4 x Screws for the tapping tower • 1 x CO2 gas regulator • 1 x CO2 cylinder holder • 1 x 4-way Push Fit Splitter 5/16 • 1 x Refrigerator • 1 x Stainless steel tower • 1 x drip tray • 3 x SS Ultra Taps • 3 x Beer MFL Ball Couplings • 3 x Gas MFL Ball Couplings • 6 x MFL 8 mm Push Fit • 7 x beer / gas pipes 1.4m 4mm ID 8 mm OD • 4 x Wheels • 16 x Wheel screwsInstructions

€766
Temporarily out of stock - Advance booking available
View product
Gasfördelare 4 utgångar 1/4 barbed

Gasfördelare 4 utgångar 1/4 barbed

Gas distributor 4 outputs 1/4 nipple. Perfect when you build a kegerator and want to be able to have several barrels on the same carbon dioxide tube and then also have the option to turn off or on the gas to each barrel.

€45
Gasfördelare 3 utgångar 1/4 barbed

Gasfördelare 3 utgångar 1/4 barbed

Gas distributor 3 outputs 1/4 nipple. Perfect when you build a kegerator and want to be able to have several barrels on the same carbon dioxide tube and then also have the option to turn off or on the gas to each barrel.

€35
Temporarily out of stock
View product
Gas distributor 2 outputs 1/4 barbed

Gas distributor 2 outputs 1/4 barbed

Gas distributor 2 outputs 1/4 nipple. Perfect when you build a kegerator and want to be able to have several barrels on the same carbon dioxide tube and then also have the option to turn off or on the gas to each barrel.

€26
Gas distributor C421 2-way 3/8" barbed

Gas distributor C421 2-way 3/8" barbed

Gas distributor C421 2-way 3/8 barbed (ca 10mm). Aluminium. Perfect when you build a kegerator and want to be able to have several barrels on the same carbon dioxide tube and then also have the option to turn off or on the gas to each barrel.

€27
Temporarily out of stock
View product
Gas distributor 4-way 3/8" barbed

Gas distributor 4-way 3/8" barbed

Gas distributor 4-way 3/8" barbed (10mm). Aluminium. Perfect when you build a kegerator and want to be able to have several barrels on the same carbon dioxide tube and then also have the option to turn off or on the gas to each barrel.

€47
Temporarily out of stock
View product
O-ring for Cornelius Keg Valve

O-ring for Cornelius Keg Valve

O-ring for Cornelius Keg Valves. 1pc.

€0,4
Volume discount!
€0,2 per piece when you buy 10 or more
Temporarily out of stock
View product
Kegland MKII Regulated CO2 Charger

Kegland MKII Regulated CO2 Charger

KegLand charger kits are made from machined anodised aluminium, no cheap plastic here!This Premium Regulated CO2 Charger is the compact solution for portable setups. Simply screw on the MFL threaded disconnect (Stainless Steel Gas MFL will require teflon tape) then using the needle valve adjust how much pressure you need.Our Premium Regulators do not come with CO2 bulbs/cartiges. You will need to purchase these 16g bulbs separately from our website. Alsd widely available at large supermarkets if you're in dire need.Please note* MFL Grey disconnect not included.

€36
Kegland Mini Co2 Charger 360 Actuator - Regulator

Kegland Mini Co2 Charger 360 Actuator - Regulator

Actuator Regulator in a robust and functional design for Sodastream cylinder and Co2 Cartridges w/thread. The Co2 flow is first activated when the piston at the top is screwed down into the pawl of the Co2 cylinder or penetrates the cartridge, ensuring that no Co2 is lost or escapes before the Co2 cylinder or cartridge is fully in place.Remove the bottom peace when mounting the regulator on a Sodastream cylinder. The design of the regulator allows for the cylinder to hang on the side of a Cornelius keg.- 2 outputs, one at a 45° angle, which fits a normal plastic ball lock and one at a 90° angle for stainless steel ball locks.- Coupling with thread that fits ball locks- 6.5mm (1/4") Duotight compatible hose barb- The manometer is well protected by a metal housing. The manometer can be interchangeable with other scales.- 65 psi/4.5 bar pressure relief valve which can be interchangeable with other pressure relief valves. Please note this is not compatible with 2 or 6 kg Co2 cylinders.WARNING:Do not overtighten the regulator onto your Co2 cylinder. It is recommended to use a spanner to hold the Sodastream cylinder while attaching and detaching the regulator.

€85
€80
DEAL
Digital manometer for Inline Regulator 0-6,2 bar

Digital manometer for Inline Regulator 0-6,2 bar

Kegland has created the world's smallest digital manometer with a backlit screen. It is robust, very accurate and has a long battery life (the battery lasts for several years if it is only read once a day). The pressure gauge can display the pressure in units such as PSI, KPA and BAR. It can measure pressures up to 6.2 bar (90 psi). It is perfect for Inline Regulator, Blowtie2 and Mini 360 Core Actuator Regulator.To display the pressure value, press the red button. To turn on the backlight, hold down the yellow button. To select device, press the yellow button several times. The screen turns off automatically after 15 seconds to save battery. Please note that the pressure gauge is only intended for gas and must not be exposed to liquid. Always use a check valve if there is a risk of backflow to the regulator.Specifications:Accuracy: +/- 1% at 20°C< br />Battery: CR2032 (included)Battery time: Over 2 years when reading once per day.Size: 27 mm x 27 mmDimensions of coupling: Ø 7.8 mm with O-ring.

€19
O-ring for Cornelius Keg Valve - Black Silicon

O-ring for Cornelius Keg Valve - Black Silicon

Silicone O-ring for Cornelius Keg Valves. 1pc. ID10.84XC/S2.71mm

€0,3
Volume discount!
€0,2 per piece when you buy 10 or more
Beer Brew CO2 Blow Gun

Beer Brew CO2 Blow Gun

This blow gun is easy to use to replace the air in fermenters, kegs or bottles with CO2 before they need to be refilled. Carbon dioxide is heavier than oxygen, which means that the oxygen is displaced and the risk of oxidation of the beer is reduced. The blowgun fits directly onto a 425g SodaStream-type carbonation cartridge without an additional adapter. Press the trigger to blow CO2 from the carbonation tube. Fits 3/8" hose. It can also be used instead of a regulator in a draft beer plant. The gun has a safety valve that triggers at 1 bar. This is a good serving pressure for most types of beer. When the safety valve beeps, you know that the pressure in the barrel is 1 bar.Please note that the gas tube, hose and barrel coupling are not included.

€50
Cornelius Keg Silicone Gasket Set

Cornelius Keg Silicone Gasket Set

Cornelius Keg Silicone Gasket Set, includes: 1 big o-ring for lid, 2 small o-rings for posts, 2 small orings for the pipe.

€2,7
Mini Keg 4L PET Oxebar with cap & handle

Mini Keg 4L PET Oxebar with cap & handle

Mini Keg PET Oxebar 4L including cap and handle is a very light and convenient way of storing and transporting beer compared heavy and bulky steel kegs such as Cornelius kegs. It is a very inexpensive way of serving draft beer as well as bringing beer to any type of event. Since it can be washed and reused, it is also a cheap way to store your beer.With the special polymer blend the oxygen barrier is improved by 3 times compared to normal PET. Beer can easily be stored up to 6 months in these kegs.Do not exceed 4 Bar / 65psiFor dispensing we recommend the specially designed tapping head.

€10
Temporarily out of stock
View product
Mini Keg 8L PET Oxebar with cap & handle

Mini Keg 8L PET Oxebar with cap & handle

Mini Keg PET Oxebar 8L including cap and handle is a very light and convenient way of storing and transporting beer compared heavy and bulky steel kegs such as Cornelius kegs. It is a very inexpensive way of serving draft beer as well as bringing beer to any type of event. Since it can be washed and reused, it is also a cheap way to store your beer.With the special polymer blend the oxygen barrier is improved by 3 times compared to normal PET. Beer can easily be stored up to 6 months in these kegs.Do not exceed 4 Bar / 65psiFor dispensing we recommend the specially designed tapping head.

€14
Mini Keg 8L PET Oxebar Kit 1

Mini Keg 8L PET Oxebar Kit 1

A complete minikeg kit Oxebar with gas bottle included.

€179
€169
DEAL
Mini Keg PET Oxebar Tapping Head Kit - Pressure Kit

Mini Keg PET Oxebar Tapping Head Kit - Pressure Kit

This tapping head with dip tube filter (pressure kit) fits the 4 and 8 L PET Oxebar mini kegs.  The tapping head is designed to fit standard ball lock disconnects making it an inexpensive solution for draft beer and bringing beer anywhere. The tapping head kit includes beer and gas posts, 2,5 bar pressure relief valve and a dip tube including filter. Ideal for any type of drink you want to serve directly from the keg.NOTE: PET Mini Keg sold seperately - Not Included.

€19
Regulator CO2 with 2-Outputs and 1-Manometer

Regulator CO2 with 2-Outputs and 1-Manometer

Regulator for CO2 cylinder with dual outputs and one manometer. Perfect if you want to divide the CO2 between two kegs for example.IN: W21.8*1/14 RH (CO2 coupling) OUT: Quick couplings

€103
Temporarily out of stock
View product
Kegland Oxygen Flow Meter 8mm Duotight

Kegland Oxygen Flow Meter 8mm Duotight

Kegland Oxygen Flow Meter with 8mm Duotight. Pure oxygen is the best way to get your yeast off to a cracking start. Simply use this high pressure and high capacity disposable tank to boost dissolved oxygen levels in your cooled wort.Oxygen is great for use with high gravity beers or pilsners where you are trying to build up a large population of yeast.We would recommend the use of a diffusion stone. These small diffusion stones create very fine bubbles of oxygen in your wort and help the oxygen to dissolve into solution faster. If you want a really nice optoin we would recommend the use of this oxygenation wand and this is a bit more erganomic as you have a rigid stainless tube to force the stone to the bottom of the fermenter rater than it floating to the surface.This flow control device is designed to be used with our oxygen cylinder and regulator that can be purchased separately.InstructionsAttach the regulator to to the top of your disposable cylinder. Turn pressure up to 1-10psi. Immerse diffusion stone in wort for 1-2 minutes. Then dial the flow meter up to 1.0L/min. The time it takes to saturate will depend on volume, temperature, depth of vessel, and type of stone (0.5mm recommended)NOTE: Wort must be cold. It is extremely difficult to get oxygen to dissolve into hot wort so it's essential to cool wort completely before starting this process.

€24
FermZilla Yellow Plastic Carbonation/Cleaning Cap

FermZilla Yellow Plastic Carbonation/Cleaning Cap

Fits CO2/Beer Ball-lock-coupling and has 1/4" (6,5mm) straight stem. Sanitize hoses or force carbonate beer on PET Bottle. Also fits FermZilla. Clean your beer line easy. Attach the cap to a soda bottle with cleaning solution. Liquid and Gas ball lock compatible. Yellow plastic.

€5,5
Ball lock Duotight 9,5mm (3/8") Gas Grey/Red

Ball lock Duotight 9,5mm (3/8") Gas Grey/Red

Ball lock disconnect with integrated Duotight 9,5mm (3/8") quick coupling. Ingenious ball coupling from kegland means you don't have to choose between hose clamp or quick coupling with threads. Now there is finally a ball coupling in really good plastic material that better resists chemicals and has a built-in quick coupling.

€10
PRV Cap for Tapping Head (PET Mini Keg)

PRV Cap for Tapping Head (PET Mini Keg)

Cap where a Pressure Relief Valve can be mounted. The cap has a standard PET bottle thread. Please Note: Never exceed the pressure capabilities of your container. Pressure Relief Valves are not spunding valves!

€4,2