Food grade PVC hose. Also suitable as acid and laboratory hose and as vacuum hose. Resistant to acids, saline, alkali, flavor, soap and synthetic detergents, sulfates, animal and vegetable oils, ethyl alcohol and glycol.Not resistant to organic solvents, esters, ketones, acetone, tri and aroma, hydrocarbons.PVC HoseInner diameter: 7 mmOuter diameter: 10 mm (ca 3/8")Working temperature: -10 ° C to + 50 ° C, but should not be used at normal working pressure at temperatures higher than + 30 ° CColor: TransparentMaterial: Made of soft transparent PVC.Approved for use in the food industry.NOTE: Sold per meter, so if you select 2 in the selection box for number, you get 2 meters of hose. The dimensions can differ by about +/- 10mm.

Food grade PVC hose. Also suitable as acid and laboratory hose and as vacuum hose.Resistant to acids, saline, alkali, flavor, soap and synthetic detergents, sulfates, animal and vegetable oils, ethyl alcohol and glycol.Not resistant to organic solvents, esters, ketones, acetone, tri and aroma, hydrocarbons.PVC HoseInner diameter: 6mm (1/4")Outer diameter: 9mm (3/8")Working temperature: -10 ° C to + 50 ° C, but should not be used at normal working pressure at temperatures higher than + 30 ° CColor: TransparentMaterial: Made of soft transparent PVC.Approved for use in the food industry.NOTE: Sold per meter, so if you select 2 in the selection box for number, you get 2 meters of hose. The dimensions can differ by about +/- 10mm.

Carbonation hose braided clear food-grade PVC. 6mm (ca 1/4") inner diameter and 11mm (7/16") outer diameter.Please Note: Sold per meter, so if you choose 2 in the select box you will get 2 meters of hose. Measurements may differ circa +/- 10mm.

Gas Manifold - CO2 Manifold 2-Way 1/4" Barb - can be used to connect two kegs to a CO2 cylinder. Outlets can be closed and opened individually with built-in check valves.  - Save money by using a single CO2 tank for multiple kegs.- Inlets and outlets are equipped with 1/4" (6.35mm) nipple (fits 6mm hose).- Behind the nipples there is a 1/4'' thread for e.g. ball locks with NPT thread.- Integrated check valve outlets prevent fluid from flowing into the manifold and your regulator, and fluid migrating from one barrel to another.- No leaks due to thread tape and heavy water testing after installation- Body made of aluminium. Rest made of brass and stainless steel.- Mounting holes allow for easy installation on walls or kegerators.

Gas Manifold - CO2 Manifold 3-Way 1/4" Barb - can be used to connect several kegs to a CO2 cylinder. Outlets can be closed and opened individually with built-in check valves.  - Save money by using a single CO2 tank for multiple kegs.- Inlets and outlets are equipped with 1/4" (6.35mm) nipple (fits 6mm hose).- Behind the nipples there is a 1/4'' thread for e.g. ball locks with NPT thread.- Integrated check valve outlets prevent fluid from flowing into the manifold and your regulator, and fluid migrating from one barrel to another.- No leaks due to thread tape and heavy water testing after installation- Body made of aluminium. Rest made of brass and stainless steel.- Mounting holes allow for easy installation on walls or kegerators.

Gas Manifold - CO2 Manifold 4-Way 1/4" Barb - can be used to connect several kegs to a CO2 cylinder. Outlets can be closed and opened individually with built-in check valves.  - Save money by using a single CO2 tank for multiple kegs.- Inlets and outlets are equipped with 1/4" (6.35mm) nipple (fits 6mm hose).- Behind the nipples there is a 1/4'' thread for e.g. ball locks with NPT thread.- Integrated check valve outlets prevent fluid from flowing into the manifold and your regulator, and fluid migrating from one barrel to another.- No leaks due to thread tape and heavy water testing after installation- Body made of aluminium. Rest made of brass and stainless steel.- Mounting holes allow for easy installation on walls or kegerators.

Gas Manifold - CO2 Manifold 5-Way 1/4" Barb - can be used to connect several kegs to a CO2 cylinder. Outlets can be closed and opened individually with built-in check valves.  - Save money by using a single CO2 tank for multiple kegs.- Inlets and outlets are equipped with 1/4" (6.35mm) nipple (fits 6mm hose).- Behind the nipples there is a 1/4'' thread for e.g. ball locks with NPT thread.- Integrated check valve outlets prevent fluid from flowing into the manifold and your regulator, and fluid migrating from one barrel to another.- No leaks due to thread tape and heavy water testing after installation- Body made of aluminium. Rest made of brass and stainless steel.- Mounting holes allow for easy installation on walls or kegerators.

Gas Manifold - CO2 Manifold 6-Way 1/4" Barb - can be used to connect 6 kegs to a CO2 cylinder. Outlets can be closed and opened individually with built-in check valves.  - Save money by using a single CO2 tank for multiple kegs.- Inlets and outlets are equipped with 1/4" (6.35mm) nipple (fits 6mm hose).- Behind the nipples there is a 1/4'' thread for e.g. ball locks with NPT thread.- Integrated check valve outlets prevent fluid from flowing into the manifold and your regulator, and fluid migrating from one barrel to another.- No leaks due to thread tape and heavy water testing after installation- Body made of aluminium. Rest made of brass and stainless steel.- Mounting holes allow for easy installation on walls or kegerators.