Temperature

Thermometer LCD 2-36 degrees Celcius. Self-adhesive. Perfect for the fermenter. Size: 21x148 mm.

This LCD-strip thermometer covers normal wine fermentation temperatures 14-30 degrees Celcius. This thermometer is self-adhesive so you can attach it to the outside of the fermenter for constant monitoring. Very practical thing that always sits where it should.Bulk-pack

Better Brew LCD-strip thermometer covers normal wine fermentation temperatures 14-30 degrees Celcius. This thermometer is self-adhesive so you can attach it to the outside of the fermenter for constant monitoring. Very practical thing that always sits where it should.

Better Brew Full-Range LCD Strip Thermometer covers normal wine fermentation temperatures 0-30 degrees Celcius. This thermometer is self-adhesive so you can attach it to the outside of the fermenter for constant monitoring. Very practical thing that always sits where it should.

Classic brewing thermometer made of glass. Scale is -10 till 110 degrees celcius. 30cm in length.

A long, accurate lab thermometer is invaluable. You can tie a string around this and let it hang down in the fermentation vessel. Since it goes all the way up to 100C, you can also use it when boiling wort and to check the cooling of the wort. An all-round instrument for beer brewing. -10 to 110 degrees Celsius. 30cm (12") long.

Thermometer Floating

*battery included*. A perfect pocket temperature probe for homebrewing and BBQ! With a range of -50°C to 300°C  you can check the temperature of your mash, whirlpool additions, or use it to check the internals of that fine-looking Lamb Roast on the bbq! Specifications:Range: -50°C ~ 300°C / -58°F ~ 572°FResolution: 0.1°CTemperature Error: +-1°C (0~100°C)Power Supply: LR44 button battery x 1Functions:ON/OFF°C/°FHOLD

*battery included*. A perfect pocket temperature probe for homebrewing and BBQ! Check the temperature of your mash, whirlpool additions, or use it to check the internals of that fine-looking Lamb Roast on the bbq! With a range of-50°C to 300°C you will be hard-pressed not to get a temperature reading unless you live in an active volcano...Lava people or something.Specifications:Range: -50°C ~ 300°C / -58°F ~ 572°FResolution: 0.1°CTemperature Error: +-1°C (0~100°C)Power Supply: AG13 button battery x 1Functions:ON/OFF°C/°FHOLD

Inkbird Digital Thermometer with foldable stainless steel measurement probe. It has a temperature range of -50°C to 300°C with ±1°C accuracy and ±0.1°C resolution. Good for measuring food, liquids, pastes and semi-solid materials.The thermometer reads temperature readout within 4-7 seconds with the thin food grade stainless probe tip. Portable carrying and hanging: Easily hold the thermometer with the friendly arc tail design. Easily storage with the space saving design(180 degree probe rotation) and the magnetic design on the back of the device could be adsorbed on steel material strongly. - Fast Readout within 4 - 7 seconds with an accurate temperature reading- Ultra-clear screen LCD display- Safety and cleanliness with the foldable probe design- Precise reading with the step-down probe design- Hold on the temperature reading before withdrawing the probe from the food.Inkbird HET-F001 Digital Food ThermometerSpecifications:Temperature Range: -50°C to 300°CDimensions: 6.69 x 1.43 x 0.63 inches/170 x 36.2 x 16mmTemperature Accuracy: ±1°C from -20 to 200°CWorks for Meat, Grilling, BBQ, Oven, Candy,Liquid, Milk, Smoker, and so on.Battery: 1 x AAA battery (NOT included)

Waterproof Instant Read Thermometer. Rechargeable Digital BBQ Meat Thermometer, Cooking Grill Thermometer with Calibration, Magnet, C/F Switch for Smoker, Kitchen, Oven, Candy, Baking.Inkbird ITH-1P is a waterproof Instant Read thermometer with built-in 250mAh Li-battery and magnetic back. Supports Calibration, C/F switch. It is quite convenient and eco-friendly and save cost as the change of dry batteries will not be needed any more.The ITH-1P ultra-fast instant read meat thermometer with 180 degree foldaway probe make it easy to storage. It is technically IPX5 waterproof and can be used outdoors on rainy days and to measure the temperature of some liquids, such as brewing, milk, cheese, etc., as well as for easy cleaning.- Temp range: ​-58°F ~ 572°F (-50°C ~ 300°C)- Temperature  Accuracy: ±1°C / ±1.8°F- 250mAh built-in lithium battery- Waterproof Grade: IPx5 rated- Net Weight: 76g​- Gross Weight: 188g​- Dimensions of LCD Display:40mm*16mm ​- Dimensions:160mm*38mm*16cm- 1 x Waterproof Instant Read Thermometer- 1 x USB Cable

The Milwaukee TH310 compact digital thermometer is specifically designed to help professionals and home owners regulate their home brew, wine process, classroom experminents or labs duties. Keeping the proper temperature improves results of beer and wine output. It also helps in understanding the quality of lab data. Keep temperature in your target range for better results.Thousands of people have relied on the Milwaukee TH310 compact Digital Temperature Meter to read temperature in all types of applications. The durable, digital readout is fast and accuracte and best of all is environmentally friendly with NO mercury, NO glass. From fish tanks to breweries, wineries and labs the TH310 Stainless Steel Stick probe is your quick temperature meter.DESIGN FEATURESFast, accurate results with large digital LCD readout.Extended temperature range: -50 to 150°C (-58 to 302°F).Cal-Check feature.Fast NTC sensor response.Easy measurement: just place the stainless steel probe in the sample and wait for the reading to stabilize.Easy sharp Stainless Steel temperature shaft for quick penetration.Stainless Steel probe for easy cleaning.Long battery life, approx. 3000 hours of continuous use (batteries included).High accurate digital readings.Clean and SafetySPECIFICATIONSTemperature Range: -50 to 150°C (-58 to 302°F)Resolution: 0.1°CAccuracy: ± 0.5°C (-20 to 90°C)Typical EMC Deviation: ±0.3°CProbe: Stainless SteelEnvironment: 0 to 50°C (32°F to 122°F), 95% RHBattery Life: approx. 3000 hours of continuousBattery Type: 1 x 1.5V (included)Package Dimensions: 10 x 2.6 x 1.9 inches (254 x 67 x 47 mm)Packaged Weight: 3.5 ounces (100 g)Here are our top four tips. 1. Always clean you stainless steel probe after use.2. Pay close attention to the direction of the probe's sharp tip.3. If the LCD begins to fade, change your batteries.4. To avoid electrical shock avoid contact with surfaces of 24 VAC or 60 VDC.WHAT PEOPLE ARE SAYING"Accurate results and calibrated right out of the box.""Must have for any aquarium owner.""Good value. Easy to use. Consistent.""No dangerous chemicals""Used it in the field for checking the fruit to harvest, was great"

The Milwaukee Waterproof pH55 PRO pH/Temp Tester with ATC is one of our most accurate cost effective, well rounded, rugged and reliable testers in the market featuring dual level LCD readouts, easily replaceable probe and extended pH ranges to meet almost any application. It's simple 1 or 2 point automatic calibration is simple-to-use and offers TWO sets of memorized buffers to select.  Ideal for use in aquariums, hydroponics, horticulture, education, pools, beer and many other applications.DESIGN FEATURESFast easy to read results with large digital LCD readout.Extreme pH accuracy to  ±0.1 pH with an extended pH range (-2.0 pH to 16.0 pH).Resolution to 0.1 pH.Lightweight and portable.Easy measurement: just place the probe in the sample, gently stir, wait for the stability indication to show a stable reading and then freeze the reading.Simple Automatic one or two-point calibration.2 Sets of pre-memorized buffers.Gel-filled, double junction pH electrode for low maintenance and high performance.Over 300 hours of battery life (batteries included).Fully waterproof to IP65.Replaceable pH electrode Mi56P.SPECIFICATIONSpH Range: -2.0 to 16.0 pHTemperature Range: -5.0 to 60.0°C (23 to 140°F)pH Resolution: 0.1 pHpH Accuracy: ±0.1 pHTemperature Accuracy: ±0.5°C (±1°F)Typical EMC Deviation: ±0.1Typical EMC Temperature Deviation: ±0.3°C (±0.6°F)Temperature Compensation: Automatic from -5 to 60°C (23 to 140°F)Calibration Automatic: 1 or 2 points with 2 sets of pre-memorized buffers (pH 4.01, 7.01, 10.01) or (pH 4.01, 6.86, 9.18)Probe: Replaceable double junction for extended life (Mi56P)Environment: -5 to 50°C / 23 to 122°F; max RH 100%Battery Type: 4 x 1.5V; IEC LR44, A76 (included)Battery Life: Approx. 300 hours of useAuto-off: after 8 minutes on non-useDimensions: 254 × 67 × 47 mmWeight: 99.22 gCARE AND USEAll pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH Tester will give you fast, accurate results for longer.Here are our top four tips. 1. Always store with the cap full of buffer or storage solution MA9015 not water.2. Clean your Tester regularly by soaking in cleaning solution MA9016.3. Calibrate after cleaning and/or storage before testing to adjust for changes in the pH sensor.4. Gently stir the Tester in the sample for a faster result.

The Milwaukee pH56 PRO pH and Temperature Tester is our most accurate tester with the ability to easily replace the probe for years of use.DESIGN FEATURES- Fast easy to read results with large digital dual LCD readout- Extreme pH accuracy to  ±0.05 pH with an extended pH range (-2.00 pH to 16.00 pH)- Lightweight and portable- Easy measurement: just place the probe in the sample, gently stir, wait for the stability indication to show a stable reading and then freeze the reading- Simple push button, automatic one or two-point calibration with 6 saved calibration points- Gel-filled, double junction pH electrode for low maintenance and high performance- Auto shut off and low power demand for a 300 hour extended battery life (batteries included)SPECIFICATIONSpH Range: -2.00 to 16.00 pHTemp Range: -5.0 to 60.0°C / 23.0 to 140.0°FpH Resolution: 0.01 pHTemp Resolution: 0.1°C / 0.1°FpH Accuracy: ±0.05 pHTemp Accuracy: ±0.5°C / ±1°FpH: Typical EMC Deviation ±0.02 pHTemp: Typical EMC Deviation ±0.3°C / ±0.6°FCalibration automatic, 1 or 2 points with 2 sets of memorized buffers (pH 4.01, 7.01, 10.01 or 4.01, 6.86, 9.18)Temperature Compensation: Automatic from -5 to 60°CProbe: Replaceable double junction for extended life (Mi56P)Environment: -5 to 50°C / 32 to 122°F; max RH 100%Battery Type: 4 x 1.5V; IEC LR44, A76 (included)Battery Life: Approx. 300 hours of useAuto-off: After 8 minutes of non-useDimensions: 7.9 inches × 1.5 inches (diameter)Weight: 3.5 ouncesCARE AND USEAll pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH Tester will give you fast, accurate results for longer.Here are our top four tips. 1. Always store with the cap full of buffer or storage solution MA9015 not water.2. Clean your Tester regularly by soaking in cleaning solution MA9016.3. Calibrate after cleaning and/or storage before testing to adjust for changes in the pH sensor.4. Gently stir the Tester in the sample for a faster result.

The Milwaukee MW150 MAX 3-in-1 pH/OPR/Temp. Bench Meter has won fans around the world with its reliable, fast, simple operation as well as a tough, sleek, lightweight design with a small lab space footprint. It is accurate to ± 0.01 pH with automatic or manual temperature compensation, and built in dedicated GLP key. In addition, up to 3-point automatic calibration and 7 selectable buffer standards makes the MW150 MAX ideal for use by brewers, wine makers, growers, labs, food processing, water treatment and many other applications with challenging pH measurement needs. Both adaptor and battery powered.WHAT PEOPLE ARE SAYING"Amazingly accurate, the best meter I have used so far.""Very satisfied, very accurate, rugged device that calibrates easily.""Rarely needs to be calibrated and gives perfect readings every time.""Killer tool, good value.""Takes up hardly any space in the lab.""Love the GLP function.""Large easy-to-read dual displays.""Easy to Clean."SUMMARYThe Milwaukee MW150 MAX 3-in-1 PRO pH/ORP/Temp Bench Meter is preferred by people testing all types of samples viscus or not, in a variety of applications that cause other pH meters and electrodes to fail. The MA917B/1 Milwaukee double junction electode is refillable and easy to clean. From brewers and wine makers to hydroponic growers, labs and water treatment, the MW150 MAX is your Bench Meter for fast, accurate readings.The Milwaukee MW150 MAX pH Bench Meter offers:ACCURACYPeople choose the MW150 MAX 3-in-1 pH/ORP/Temp Meter to improve the accuracy of their testing program. With up to 3 point calibration and 7 standard buffer choices, the meter can be quickly calibrated to a higher accuracy compared with 1 or 2 point calibration. The MW150 MAX Bench Meter is accurate to ± 0.01 pH. 5x more accurate than some alternative meters.The meter comes with a double junction pH electrode (included) and temperature sensor MA831R (included) allowing the meter to automatically adjust the pH reading for the effect of temperature (ATC).The meter can also be used as a very accurate thermometer with accuracy +/-0.4°C | +/-0.8°F.TOUGHNESSThe rugged meter is built to take knocks and is sleek and lightweight .LOW MAINTENACEThe MW150 MAX pH/OPR/Temp Bench Meter comes with the Milwaukee refillable glass MA917B/1 pH electrode and has a BNC connector allowing easy interchange to any pH Milwaukee electrode. This is Milwaukee's top selling lab grade electrode for a reason. Designed to be both low maintenance (refillable) and able to withstand more challenging samples (double junction). The MA917B/1 is ideal for use in beer making, winemaking and hydroponics, environmental labs and many other applications.DESIGN FEATURESFast easy to read results with large duel level digital LCD readout.Extreme accuracy to ±0.01 pH | +/-0.4°C | +/-0.8°F.Extended range (-2.00 pH to 20.00 pH).Lightweight and small bench footprint.Easy measurement: just place the pH electrode and temp. probe in the sample, gently stir and wait for the reading to stabilize.Simple push button, automatic up to 3 point calibration for increased accuracy.Up to 7 selectable pH calibration buffers (1.68, 4.01, 6.86, 7.01, 9.18, 10.01 and 12.45).Refillable, double junction, lab grade pH electrode for low maintenance and high performance with a screw on cap to ensure proper storage.Automatic Temperature compensation (ATC).Built-in rechargeable battery with 8 hours battery life (battery included).Alphanumeric LCD display messages for friendly, intuitive information, warnings and error messages.Internal clock date to keep track of different time-dependent functions (calibration, timestamp,calibration time out).Dedicated GLP key function.3 feet probe cables for extra flexibility when testing.CARE AND USEpH meters usually start performing poorly because of problems with the probe. The two parts of the pH probe that cause problems are the glass sensing bulb and the reference junction.SENSING BULBThe glass bulb loses sensitivity with use and will eventually fail. This is true of all pH probes.REFERENCE JUNCTIONThe reference junction is a small hole that allows the meter to compare the sample to a reference. The reading is generated based on the electrical difference between the sample and reference. If the junction hole gets clogged, the pH electrode will no longer function.You can extend the life of your pH electrode in the following ways.CLEANING AND STORAGEAll pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH pen tester will give you fast, accurate results for longer. So, be sure to order the Milwaukee pH Maitenance Kit code PH-Main at checkout time! This will be needed to help clean and condition the pH electrode before use!STORAGETo minimize clogging the pH probe needs to be kept hydrated. Long periods of dry storage will damage the sensitivity of the probe. Allowing the probe to dry out may also result in the junction hole getting clogged.Storing in pH probe storage solution or pH calibration buffers will help address both these issues. Do not store in tap water or DI water. This will damage the sensitivity of the probe.The best way to store the probe is with the probe's cap filled with storage solution or calibration buffer and the cap tightened to prevent leakage. It is also recommended that to store the electrode upright to further reduce the potential for leakage.CLEANING AN MAINTENANCEResidue from the sample can impact the sensitivity of the sensing bulb and clog the junction. This is especially true if the sample has a lot of organic material. We recommend regularly soaking your electrode in cleaning solution. Also:1. Inspect the electotrode for damage or scratches, if present replace the electrode.2. Inspect the cable. The connection cable and insulation must be intact.3. Connectors should be clean and dry.4. Rinse off salt deposits with water or DI water.CALIBRATIONThe pH sensing bulbs become less sensitive over time so make sure that you are calibrating regularly to keep your PRO Plus Bench pH Meter accurate. Also, calibrate after cleaning or a long period of storage.Thank you for considering Milwaukee to help you take your results to the next level.

The Milwaukee TH300 compact digital thermometer is specifically designed to help professionals and home owners regulate their pools, wine process, classroom experminents or labs duties. Keeping the proper temperature improves results of beer and wine output. It also helps in understanding the quality of lab data. Keep temperature in your target range for better results.Thousands of people have relied on the Milwaukee TH300 compact Digital Temperature Meter to read temperature in difficult areas with it's flexible 1 meter cable and stainless steel probe. The durable, digital readout is fast and accuracte and best of all is environmentally friendly with NO mercury, NO glass. From fish tanks to breweries and wineries the TH300 is your quick temperature meter.DESIGN FEATURES- Fast, accurate results with large digital LCD readout.- Extended temperature range: -50 to 150°C (-58 to 302°F)-Easy measurement: just place the stainless steel probe in the sample and wait for the reading to stabilize.- Easy, flexible 1 meter cable for hard to reach places.- Stainless Steel pointed probe for easy fruit penetration and easy cleaning.- Long battery life, approx. 1 year. (batteries included)- High accurate digital readings.- Clean and SafetySPECIFICATIONSTemperature Range: -50 to 150°C (-58 to 302°F)Resolution: 0.1°CAccuracy: ± 0.5°C (-20 to 90°C)Typical EMC Deviation: ±0.3°CProbe: Stainless Steel with 1 m cableEnvironment: 0 to 50°C (32°F to 122°F), 95% RHBattery Life: approx. 1 yearBattery Type: 1 x 1.4V (included)Package Dimensions: 8.6 x 3.6 x 1.9 inches (225 x 91 x 47 mm)Packaged Weight: 4.9 ounces (140 g)Here are our top four tips. 1. Always clean you stainless steel probe after use.2. Pay close attention to the direction of the probe's sharp tip.3. If the LCD begins to fade, change your batteries.4. To avoid electrical shock avoid contact with surfaces of 24 VAC or 60 VDC.WHAT PEOPLE ARE SAYING"Accurate results and calibrated right out of the box.""Must have for any aquarium owner.""Good value. Easy to use. Consistent.""No dangerous chemicals""Used it in the field for checking the fruit to harvest, was great"

The Milwaukee MW102 PRO+ Food pH meter has won fans around the world with its reliable, fast and simple operation as well as its toughness and accuracy. The MW102 Food pH meter combines the power of the MW102 meter with the specialist capabilities of the MA920B/1 Direct Measurement Food Grade pH Probe. FOOD PH METER. LAB GRADE. HIGH PERFORMANCE. TOUGH.SUMMARYThe Milwaukee PRO+ pH Meter is a specialist food pH meter and probe combination specifically designed for the pH analysis of semi-solid foods such as processed meats, soft cheeses, soups, sauces, and sushi rice.SPECIFICATIONSpH Range: 0.00 to 14.00 pHTemp Range: 23 to 104°FpH Accuracy ±0.02 pHpH Resolution: 0.01 pHpH Typical EMC Deviation: ±0.2 pHTemp Resolution 0.1°CTemp Accuracy (@25°C): ±0.5°CTemperature Compensation: Automatic, 0 to 70°CTemp Typical EMC Deviation: ±0.5°CCalibration: Automatic, 1 or 2 pointspH Electrode: MA920B/1 (included)Temperature: Probe MA830R (included)Environment: 0 to 50°C / 32 to 122°F; max RH 95%Battery Type: 1 x 9V (included)Battery Life: Approx. 300 hours of continuous useAuto-off: After 8 minutes of non-useApproximate dimensions: 5.7 x 3.1 x 1.6 inchesWeight: 1.1 lbs with batteryThe Milwaukee PRO pH meter offers:ACCURACYPeople choose the PRO+ pH Meter to improve the accuracy of their pH testing program. With two point calibration, the meter can be quickly calibrated to a higher accuracy compared with one point calibration. The MW102 meter has accuracy to ± 0.02 pH. 5x more accurate than some alternative meters.The meter comes with both a pH probe and temperature probe allowing the meter to automatically adjust the pH reading for the effect of temperature.The temperature probe can also be used as a very accurate thermometer.TOUGHNESSThe rugged meter is built to take knocks.SPECIALIZED DESIGN FOR PH ANALYSIS IN FOODMA920 food probe features include an open junction design that reduces clogging from suspended solids and proteins found in food and dairy products for a more stable pH measurement and reduced maintenance.The probe also has a conical shaped tip design which allows for penetration into solids, semi solids, and emulsions for the direct measurement of pH in a variety of food products.In addition, the body is constructed from polyvinylidene fluoride (PVDF). PVDF is a food grade plastic that is resistant to most chemicals and solvents used for disinfection in the food sector, including chlorine (bleach).DESIGN FEATURESFast easy to read results with large digital LCD readoutExtreme accuracy to ±0.02 pH and extended range (-2.00 pH to 16.00 pH)Lightweight and portableEasy measurement: just place the probe in the sample, gently stir and wait for the reading to stabilizeSimple push button, automatic two-point calibration for increased accuracyFood grade electrode with a rugged, easy-to-clean, PVDF body, a conical tip for use with semi solids with a screw on cap to ensure proper storageRugged stainless temperature probe3 feet probe cables for extra flexibility when testingAuto shut off and low power demand with approx. 300 hours of continuous use (battery included)CARE AND USE pH meters usually start performing poorly because of problems with the probe. The two parts of the pH probe that cause problems are the glass sensing bulb and the reference junction.SENSING BULBThe glass bulb loses sensitivity with use and will eventually fail. This is true of all pH probes.REFERENCE JUNCTIONThe reference junction is a small hole that allows the meter to compare the sample to a reference. The reading is generated based on the electrical difference between the sample and reference. If the junction hole gets clogged, the pH electrode will no longer function.You can extend the life of your pH electrode in the following ways.STORAGEThe pH probe needs to be kept hydrated. Long periods of dry storage will damage the sensitivity of the probe. Allowing the probe to dry out may also result in the junction hole getting clogged.Storing in pH probe storage solution MA9015 or pH calibration buffers will help address both these issues. Do not store in tap water and DI water. This will damage the sensitivity of the probe.The best way to store the probe is with the probe's cap filled with storage solution or calibration buffer and the cap tightened to prevent leakage. It is also recommended that to store the electrode upright to further reduce the potential for leakage.CLEANINGResidue from the sample can impact the sensitivity of the sensing bulb and clog the junction. This is especially true if the sample has a lot of organic material. We recommend regularly soaking your electrode in cleaning solution MA9016.CALIBRATIONThe pH sensing bulbs become less sensitive over time so make sure that you are calibrating regularly to keep your PRO Plus pH meter accurate. Also, calibrate after cleaning or a long period of storage.WHAT PEOPLE ARE SAYING"Amazingly accurate, the best meter I have used so far.""Very satisfied, very accurate, rugged device that calibrates easily.""Rarely needs to be calibrated and gives perfect readings every time.""Killer tool, good value."

The Milwaukee MW102 PRO+ pH meter has won fans around the world with its reliable, fast and simple operation as well as its toughness. Accurate to ± 0.02 pH with automatic temperature compensation (ATC). Ideal for use by brewers, wine makers, growers and other users with challenging pH measurement needs. Battery is included.SUMMARYThe Milwaukee PRO+ pH Meter is preferred by people testing samples that cause other pH testers and meters to fail from brewers and wine makers to hydroponic growers and farmers.The Milwaukee PRO pH meter offers:ACCURACYPeople choose the PRO+ pH Meter to improve the accuracy of their pH testing program. With two point calibration, the meter can be quickly calibrated to a higher accuracy compared with one point calibration. The MW102 meter is accuracy to ± 0.02 pH. 5x more accurate than some alternative meters.The meter comes with both a pH probe and temperature probe allowing the meter to automatically adjust the pH reading for the effect of temperature.The temperature probe can also be used as a very accurate thermometer.TOUGHNESSThe rugged meter is built to take knocks.LOW MAINTENACEThe PRO+ pH meter comes with the Milwaukee SE220 pH probe. The SE220 is Milwaukee's top selling lab grade electrode for a reason. Designed to be both low maintenance (gel filled) and able to withstand more challenging samples (double junction). The SE220 is ideal for use in beer making, winemaking and hydroponics. SPECIFICATIONSpH Range: -2.00 to 16.00 pHTemp Range: -5 to 70°CpH Accuracy ±0.02 pHpH Resolution: 0.01 pHpH Typical EMC Deviation: ±0.2 pHTemp Resolution 0.1°CTemp Accuracy (@25°C): ±0.5°CTemperature Compensation: Automatic, 0 to 70°CTemp Typical EMC Deviation: ±0.5°CCalibration: Automatic, 1 or 2 pointspH Electrode: SE220 (included)Temperature: Probe MA830R (included)Environment: 0 to 50°C / 32 to 122°F; max RH 95%Battery Type: 1 x 9V (included)Battery Life: Approx. 300 hours of continuous useAuto-off: After 8 minutes of non-useApproximate dimensions: 5.7 x 3.1 x 1.6 inchesWeight: 1.1 lbs with batteryDESIGN FEATURESFast easy to read results with large digital LCD readoutExtreme accuracy to ±0.02 pH and extended range (-2.00 pH to 16.00 pH)Lightweight and portableEasy measurement: just place the probe in the sample, gently stir and wait for the reading to stabilizeSimple push button, automatic two-point calibration for increased accuracyGel-filled, double junction lab grade pH electrode for low maintenance and high performance with a screw on cap to ensure proper storageRugged stainless temperature probe3 feet probe cables for extra flexibility when testingAuto shut off and low power demand with approx. 300 hours of continuous use (battery included)CARE AND USE pH meters usually start performing poorly because of problems with the probe. The two parts of the pH probe that cause problems are the glass sensing bulb and the reference junction.SENSING BULBThe glass bulb loses sensitivity with use and will eventually fail. This is true of all pH probes.REFERENCE JUNCTIONThe reference junction is a small hole that allows the meter to compare the sample to a reference. The reading is generated based on the electrical difference between the sample and reference. If the junction hole gets clogged, the pH electrode will no longer function.You can extend the life of your pH electrode in the following ways.STORAGEThe pH probe needs to be kept hydrated. Long periods of dry storage will damage the sensitivity of the probe. Allowing the probe to dry out may also result in the junction hole getting clogged.Storing in pH probe storage solution MA9015 or pH calibration buffers will help address both these issues. Do not store in tap water and DI water. This will damage the sensitivity of the probe.The best way to store the probe is with the probe's cap filled with storage solution or calibration buffer and the cap tightened to prevent leakage. It is also recommended that to store the electrode upright to further reduce the potential for leakage.CLEANINGResidue from the sample can impact the sensitivity of the sensing bulb and clog the junction. This is especially true if the sample has a lot of organic material. We recommend regularly soaking your electrode in cleaning solution MA9016.CALIBRATIONThe pH sensing bulbs become less sensitive over time so make sure that you are calibrating regularly to keep your PRO Plus pH meter accurate. Also, calibrate after cleaning or a long period of storage.WHAT PEOPLE ARE SAYING"Amazingly accurate, the best meter I have used so far.""Very satisfied, very accurate, rugged device that calibrates easily.""Rarely needs to be calibrated and gives perfect readings every time.""Killer tool, good value."

Analog kitchen thermometer in stainless steel for pots and pans. Clear numbers. Smart clamp for the pan edge (removable). Not to be used in the oven. Measuring range: 0 to 220 °C. Diameter 70mm.Can be used as:Cooking thermometerKitchen thermometerHousehold thermometerMatter thermometerFrying thermometerMeat thermometerBack thermometerPot thermometerPan thermometer etc.

Analog oven thermometer in stainless steel. The oven thermometer can stand on its own or be suspended. Measuring range: 50 - 300 °C (NOTE! does not measure minus degrees). Diameter 60mm.Can also be used as:Cooking thermometerKitchen thermometer

The RAPT Pill provides accurate real-time density (SG) and temperature measurement and control via the WiFi/Bluetooth integration with the RAPT mobile app/RAPT IOT. Made to measure in your fermenter!RAPT Pill provides accurate specific gravity (SG) and real-time temperature logging and control via wifi/bluetooth. The RAPT pill functions as both a hydrometer and thermometer for real-time gravity testing, enabling instant gravity and temperature measurements and also logs from inside the fermenter during fermentation.The RAPT Pill has many advantages over other wireless hydrometers and thermometers including rugged design, better ergonomics, sanitary design and less prone to errors as a result of hops, krausen or CO2 bubbles generated from fermentation.Specifications:The RAPT Pill is approximately 37mm x 125mm - compact enough to fit almost anywhere!Note:Make sure the RAPT pill is charged for 24 hours before use. This is to ensure that it is fully charged and that the battery is calibrated.When the RAPT Pill is connected via USB-C and connected to wifi, the firmware will automatically update to the current version (if needed). Pill must be connected via USB-C and connected to Wi-Fi to receive firmware updates. What is RAPT?RAPT IOT Hub is a free service where all RAPT-enabled products can both log and store data to the hub where you can conveniently access this data. The RAPT hub can also allow you to remotely control your devices giving you absolute control over your device no matter where you are. The RAPT portal enables you to make complex temperature profiles involving different temperature settings over time, meaning you can start/run a temp profile giving you a set and forget experience. The RAPT portal also controls the alert/notification process for you so that you can receive email notifications if something does not go according to plan.There is no limit to the number of RAPT devices you can connect RAPT IOT Hub. This is unlike other popular wireless hydrometers where you are limited by the number of hydrometers you can connect to an app.Please note: RAPT Pill is fully Wi-Fi and Bluetooth compatible. Currently, it can be fully integrated with wifi. Bluetooth integration will be enabled with a later firmware update.GoogleThe Google Play Android app can be downloaded from the link below.https://play.google.com/store/apps/details?id=io.raptAppleThe Apple App Store RAPT app can be downloaded via the link below.https://apps.apple.com/th/app/rapt/id1573192994"This app is a web mobile wrapper that allows you to browse the RAPT portal/website so that the website is rendered to a mobile device screen increasing the usability on your device. It also gives you the added functionality of push notifications to your mobile device."

A wireless hydrometer and thermometer that measures directly in the fermenter, and comminicates to the app BrewConnect via WiFi. It can be used independently in a brewing via WiFi, but the extra smart thing is that it can communicate directly with Ferminator Connect via Bluetooth. This allows a Ferminator Connect to know the exact temperature inside the beer and adjust the temperature even more precisely. The Gravity charger is charged wirelessly via the included wireless charger. It should therefore never be opened, and you avoid the risk of it leaking and destroying a brew. If the Graviator is not charged before brewing, this is not a problem. It can be charged in approx. 5 hours. The improved algorithm in Graviator, the unique design and build quality provide a high accuracy of ± 0.002 SG. The size and weight of the engraver also make it more stable under the crotch.Please observe! The Graviator does not work with steel fermenters.

Graviator Wireless Charger can charge a Graviator of approx. 5 hours. The charger follows the Qi standard and can charge with 5W / 7.5W / 10W. This charger will also work with your phone if it's Qi-enabled.

Designed for high performance production scale stainless steel fermentation tanks, our new Tilt® Pro brings Tilt technology to professional craft brewers. At 3x the volume and weight of our original Tilt hydrometer, the Tilt Pro's larger size allows us to more than double the battery life with preinstalled Energizer® AA lithium batteries that will keep it powered for 3 to 5 years depending on use. So much time you may forget your Tilt actually runs on a battery!The extra size and weight comes with an extra bonus: improved specific gravity stability at high krausen so you will see a steadier read-out on your iPhone, Android, or Raspberry Pi. In addition, we have boosted range with a high-gain antenna that in testing increased range by 20% vs. our original Tilt. Now you can see your Tilt through thicker heads of foam and heavier stainless steel walls. To top it off we've included the extra decimal of precision available from the sensors and to the read-out so there are now decimal degrees Fahrenheit as well as higher resolution Celsius. Specific gravity now reads out to the 10,000th place (for example 1.0000). You can now see fermentation activity dropping less than a brewer's point per day. In all we've made several adjustments we believe the craft beer professional (and serious home brewer) is sure to appreciate.Specifications TILT PRO WIRELESS HYDROMETER AND THERMOMETERSize: 1.7" (43mm) diameter (max) by 5.4" (140mm) tallWeight: 5.4 ounces (153g)Specific Gravity Measurement Range: 0.9900 - 1.1200Specific Gravity resolution: 0.00001Temperature Measurement Range: 0°F - 140°F (-17.8°C - 60°C)Note: Installed lithium batteries include a built in PTC (heat activated fuse) that will temporarily cut power if batteries exceed 140°F.Temperature resolution: 0.1°F (0.1°C)Absolute Maximum Temperature Range: -40°F to 185°F (-40°C to 85°C)Battery: User-replaceable, 2x 1.5v AA battery (Li/FeS2), widely sold as "Energizer® AA Ultimate Lithium".If using multiple Tilt hydrometers for different batches of fermenting beer you must use a different color for each batch. The app will not read multiple hydrometers of the same color.Each Tilt comes calibrated and ready to go with a pre-installed battery. Just download the free app, sanitize your Tilt, drop in your fermenter, and start taking readings with your phone, tablet, or Tilt Pi. Download the free Tilt app at the Apple App Store or Google Play Store or get the free Tilt Pi download.

Designed for high performance production scale stainless steel fermentation tanks, our new Tilt® Pro brings Tilt technology to professional craft brewers. At 3x the volume and weight of our original Tilt hydrometer, the Tilt Pro's larger size allows us to more than double the battery life with preinstalled Energizer® AA lithium batteries that will keep it powered for 3 to 5 years depending on use. So much time you may forget your Tilt actually runs on a battery!The extra size and weight comes with an extra bonus: improved specific gravity stability at high krausen so you will see a steadier read-out on your iPhone, Android, or Raspberry Pi. In addition, we have boosted range with a high-gain antenna that in testing increased range by 20% vs. our original Tilt. Now you can see your Tilt through thicker heads of foam and heavier stainless steel walls. To top it off we've included the extra decimal of precision available from the sensors and to the read-out so there are now decimal degrees Fahrenheit as well as higher resolution Celsius. Specific gravity now reads out to the 10,000th place (for example 1.0000). You can now see fermentation activity dropping less than a brewer's point per day. In all we've made several adjustments we believe the craft beer professional (and serious home brewer) is sure to appreciate.Specifications TILT PRO WIRELESS HYDROMETER AND THERMOMETERSize: 1.7" (43mm) diameter (max) by 5.4" (140mm) tallWeight: 5.4 ounces (153g)Specific Gravity Measurement Range: 0.9900 - 1.1200Specific Gravity resolution: 0.00001Temperature Measurement Range: 0°F - 140°F (-17.8°C - 60°C)Note: Installed lithium batteries include a built in PTC (heat activated fuse) that will temporarily cut power if batteries exceed 140°F.Temperature resolution: 0.1°F (0.1°C)Absolute Maximum Temperature Range: -40°F to 185°F (-40°C to 85°C)Battery: User-replaceable, 2x 1.5v AA battery (Li/FeS2), widely sold as "Energizer® AA Ultimate Lithium".If using multiple Tilt hydrometers for different batches of fermenting beer you must use a different color for each batch. The app will not read multiple hydrometers of the same color.Each Tilt comes calibrated and ready to go with a pre-installed battery. Just download the free app, sanitize your Tilt, drop in your fermenter, and start taking readings with your phone, tablet, or Tilt Pi. Download the free Tilt app at the Apple App Store or Google Play Store or get the free Tilt Pi download.

Designed for home brewing, the Tilt hydrometer lets you instantly read your brew's specific gravity and temperature on your compatible Apple iPhone/iPad or Android smartphone/tablet or Tilt Pi. Most Bluetooth 4.0+ devices will work with the Tilt. You can then optionally log data to the cloud using our free Google Sheets template or other 3rd party cloud platforms. See our Apps section for more detail.The specific gravity is accurate +/- 0.002 within the Tilt's range of 0.990 to 1.120. The thermometer is accurate +/- 1 degree F (+/- 0.5 degree C).Our goal is to help home brewers brew better beer. The Tilt hydrometer allows you to check the specific gravity and temperature of your beer while it's fermenting, without ever having to open your fermenter or pour out any of your precious brew. This makes brewing more consistent and easy to track. Here are some of the new features of the Tilt:Range: Better reception and range. With the increased transmission power your Tilt will send data through larger, thicker-walled fermenters.Precision: Upgraded sensors. With an improved temperature sensor and accelerometer your Tilt will operate with more precision. Efficiency: We've reduced power consumption so more brews, less battery.New Look: Newly designed custom circuit board and harness.If using multiple Tilt hydrometers for different batches of fermenting beer you must use a different color for each batch. The app will not read multiple hydrometers of the same color.Each Tilt comes calibrated and ready to go with a pre-installed battery that lasts 12-24 months depending on usage. Just download the free app, sanitize your Tilt, drop in your fermenter, and start taking readings with your phone, tablet, or Tilt Pi. Download the free Tilt app at the Apple App Store or Google Play Store or get the free Tilt Pi download.