JANUARY SALE

Bazooka Screen 15cm (6"), stainless steel. Large mesh size of 1mm (mesh size 16).

Bazooka Screen 30cm (12"). Stainless steel. Large mesh size - Mesh size: 16 (1mm)

Bottle filler for tap with Silicone/PVC-hose connector to classic tap. NOTE: Doe NOT fit on taps with barbs, use the tap thats linked on this page below. End cap is removable.

The Brew Cooler XL is an extra large waterproof, insulated cooling bag to keep correct fermentation temperature in fermenters and kegs up to 30L. Either one 30L fermenter or two cornelius kegs fits inside. Perfect if you dont have space or possibility to place your fermenter in a temperature controlled refrigerator at home.How the Brew Cooler XL worksThe function is simple, place your fermenter or keg(s) inside the Brew Cooler and add frozen water bottles (preferrably plastic) inside the Brew Cooler to reduce and keep the correct fermentation temperature. The volume of frozen water in the plastic bottles determines how many degrees below room temperature the fermenter will be kept at. The frozen water bottles should preferrably be replaced every 24 hours, or when needed.1. Place the Brew Cooler at a suitable location in your home. Place your fermenter with wort inside the Brew Cooler.2. Place the correct number of frozen water bottles inside the Brew Cooler according to the Temperature Chart below.3. Close Brew Cooler zip locks.4. After 24 hours, exchange the frozen water bottles for new ones.Temperature Chart: Choose the correct fermentation temperatureThis chart gives examples of the number and size of frozen water bottles that is needed for a given temperature reduction in the Brew Cooler for 20L beer.One 1-liter bottle reduce 1,5°C.Two 1-liter bottles reduce 3°C.One 1,5-liter bottle reduce 2°C.Two 1,5-liter bottles reduce 4°C.Three 1,5-liter bottles reduce 6°CFour 1,5-liter bottles reduce 8°C.One 2-liter bottle reduce 3°C.Two 2-liter bottles reduce 6°C.Three 2-liters bottles reduce 9°C.Four 2-liter bottles reduce 12°C.These temperature reductions are valid for 20L beer in the fermenter. As can be seen, the temperature reduction is about 1,5°C per liter frozen water. The maximum temperature reduction that can be archieved is about 15°C.Example: If your home ambient temperature is 21°C and you want to ferment 20L ale at 18°C, add one 2-liter or two 1L) frozen plastic water bottle together with your fermenter in the Brew Cooler. Exchange every 24 hours and repeat at least the first 3-4 days during the primary fermentation. If your brew 10L then about half the volume, 1-1.5L frozen water, is enough. What is the correct fermentation temperature?To get your home brew to taste as good as possible its important to control the fermentation temperature. An ale can theoretically be fermented at room temperature, 20-22°C, however it will taste the cleanest when fermented around 18°C, at least the first 3-4 days of fermentation. Lagers should be fermented at 10-12°C. Saisons can be fermented at high temperatures, 20-35°C, depending on the flavour profile you want.Brew Cooler XL 30L specificationsHeight: 70 cmLength 40 cmWidth: 40 cmInternal supports: 60cm Vertical rib supports keeps the bag upright by itself.Material: Tough black polyester with insulation and a grey water proof inner liner.Carrying strap: The Brew Cooler is equipped with an adjustable carrying strap.Note: Fermenters, kegs or other accessories are not included.

Insulation jacket for the Brewly 30L Conical Fermenter (both versions). Material: 5 mm neoprene foam.

Brewly Chiller 13m in Stainless Steel with optimized distance between the spirals for faster cooling of the wort. Includes Quick Connectors (3/4-inch) that are Gardena system-compatible (as in image). Suitable for breweries, pots and kettles up to 70L. Cooling Spiral length: 13 metersSpiral diameter: ca 25 cmSpiral height: ca 35 cmTotal height: ca 52 cm

Brewly Chiller 8,8m in Stainless Steel with optimized distance between the spirals for faster cooling of the wort. Includes Quick Connectors (3/4-inch) that are Gardena system-compatible.Suitable for breweries, pots and kettles up to 40L.Spiral diameter: ca 25 cmSpiral height: ca 25 cmTotal height: ca 39 cmCooling spiral length: 8,8 meters.

Brewolution Chiller 8,8m in Stainless Steel with optimized distance between the spirals for faster cooling of the wort. Suitable for breweries, pots and kettles up to 40L. Fits 3/8" pushfit fittings, perfect for hose with 3/8" (9,5mm) outer diameter. Fittings and hose not included.Diameter 25 cm.Height 37 cm.

Upgrade your Brewster Dominator to a 65-litre system for bigger batches and bold beers. This setup lets you brew approximately 50 litres of finished beer, and with a 20 kg malt capacity, you can craft larger batches, bolder beers, and have endless possibilities! Premium Quality for the Best Value. Brew approx. 50 L. beer The grain basket can hold an impressive 20 kg of malt Brew 2 x 25 All-Grain-Kits Easily upgrade to a 65-litre brew system Kit includes all you need Easily upgrade the Brewster Dominator 40-litre system to a 65-litre capacity with this extension kit. Premium Quality for the Best Value. This setup allows you to brew approximately 50 litres of finished beer, offering greater flexibility for larger batches. The grain basket can hold an impressive 20 kg of malt, giving you the potential to craft seriously bold, high-gravity beers. Even with a smaller 25-litre batch, you can brew a truly robust beer by using the full 20 kg malt capacity. Brewster Dominator Extension Kit 25 includes:- Boiler Extension 25 L- Grain Basket Extension 47 L- Recirculation Pipe Extension- Sight Glass Extension with Stainless Steel Shield- Silicone Seal for Boiler Extension

Brewtools MiniUni 40L The MiniUni™ tanks are a range of high quality, flexible yeast tanks at a very reasonable price. They can be used for fermentation, storage and serving of beer but also other uses such as water heating, storage of cleaning agents, HERMS installation, etc. MiniUni™ can be placed in the included base but also hung on the wall with the included wall bracket. By using a pressure fermentation kit (optional equipment) you can ferment under pressure and carbonation in the tank.All MiniUni™ are approved for 2 bar (30 psi) and will last a lifetime!! Key Features:PureBlast™ surface inside and out which eliminates the use of wax and polishing agents in manufacturing. The tank also does not need to be passivated.Easy cleaning with 4" Tri-Clamp opening in the top and a 2" Tri-Clamp in the bottomPressure approved up to 2 bar (30 psi)Wall bracket is included Designed and produced with quality in focus. Tested by independent party to meet PED 2014/68/EUSpecification:Pack size: 34 (w) x 34(d) x 92 (h) cmWeight without packaging: 11.2 kgWeight with packaging: 12 kgTank diameter (inside): Ø28 cmMax. recommended volume: 40 litersVolume, cone: 1.7 litersMaterial: 1.5mm stainless steel (SS304)Maximum pressure: 2.0 bar / 30 PSI< strong>This comes with:MiniUni™ TankBase with silicone gasketWall mount and baseSafety lock for wall mountComposite TC adapter 4" to 34mmIce lock, 3-piece with holderTri-Clamp 4"Tri-Clamp 2"Tri-Clamp gaskets

Brewtools MiniUni 50L The MiniUni™ tanks are a range of high quality, flexible yeast tanks at a very reasonable price. They can be used for fermentation, storage and serving of beer but also other uses such as water heating, storage of cleaning agents, HERMS installation, etc. MiniUni™ can be placed in the included base but also hung on the wall with the included wall bracket. By using a pressure fermentation kit (optional equipment) you can ferment under pressure and carbonation in the tank.All MiniUni™ are approved for 2 bar (30 psi) and will last a lifetime!! Key Features:PureBlast™ surface inside and out which eliminates the use of wax and polishing agents in manufacturing. The tank also does not need to be passivated.Easy cleaning with 4" Tri-Clamp opening in the top and a 2" Tri-Clamp in the bottomPressure approved up to 2 bar (30 psi)Wall bracket is included Designed and produced with quality in focus. Tested by independent party to meet PED 2014/68/EU Specification:Pack size: 34 (w) x 34(d) x 108.5 ( h) cmWeight without packaging: 12.85 KgWeight with packaging: 14.8 KgTank diameter (inside): Ø28 cmMax. recommended volume: 10 litersVolume, cone: 1.7 litersMaterial: 1.5mm stainless steel (SS304)Maximum pressure: 2.0 bar / 30 PSIThis comes with: MiniUni™ TankBase with silicone gasketWall mount and baseSafety lock for wall mountComposite TC adapter 4" to 34mmIce lock, 3-piece with holderTri-Clamp 4"Tri-Clamp 2"Tri-Clamp gaskets

BrewZilla Generation 4 is the latest evolution in this series of RIMS breweries and has now become more flexible and powerful than ever. Although the exterior shape is largely the same, almost everything on the inside has been redesigned. The two big news are the new control unit with WiFi and Bluetooth as well as the concave bottom with built-in heating elements that implement Ultra Low Watt Density.The brewing process is still similar where you mash, leach and boil in the same vessel and the accompanying cooling coil means you can also cool the wort after boiling. During mashing, the wort is pumped around over the malt bed and then strained off and leached by lifting the malt basket up and placing it on the edge at the top of the pot.BrewZilla 35L Gen 4 RAPT Brewery Specifications:- Stainless construction- Detachable control unit with WiFi and Bluetooth connectivity- Programmable mash schedule with up to 6 steps- Ultra Low Watt Density heating element 3500 W- Malt barrel with removable bottom and feet in two levels for leaching- Stainless cooling coil- Volume graded pot- Magnetic pump at the bottom connected to ball valve and recirculation arm- Two upper and one lower handles for easier cleaning and handling- Brew volume max: 65 l- Maximum amount of malt: 18.5 kg- Height with recirculation arm mounted: 915 mm- Diameter: 406 mmComplete Concave Draining BaseThe new base design completely drains out meaning you capture every single bit of wort. No longer do you need to tilt the brewery to extract every last bit of wort. This also makes it suitable for CIP cleaning using our new Low Volume CIP Spray Rotor (KL04329).False Bottom Pump Protection ScreenOne of the key features of all the BrewZilla single vessel units is the false bottom protection screen. This screen avoids the need for doing a whirlpool and it filters wort and prevents more than 95% of hops and hot break getting sucked into the pump and thus greatly reduces the blocked pump issues that are often an issue with other brewery designs.Ultra Low Watt DensityThe BrewZilla has signficantly lower watt density than other breweries. The main benefit of lower watt densities are that it enables you to produce lighter colours of beers that would otherwise get some caramelisation. The ultra low watt density also means you have less chance of boil overs, you get less crud sticking to the element making cleaning easier and ultimately reduces wear and tear on the element meaning even with significant abuse your elements will last way longer.RAPT/Wifi ConnectedThe new Gen 4 model is the first BrewZilla that connects to the RAPT Portal (https://app.rapt.io/). This portal allows you to track, record and monitor your brews online. This greatly reduces the need for handwritten records of your brew day as it's all done automatically. The RAPT portal also allows you to see every brew you have done in the past and control the brewery remotely so you can start pre-heating water remotely or simply keep an eye on the brewing process while you do something else. Get push notifications to your mobile phone of when to add hops or start the boil. Along with this ease of access and control. The RAPT BrewZilla will also allow you to fully customise your brewday with profiles specifically tuned to your style of brewing or your recipe.For example you could set up your profile to receive certain alarms or messages when you are required to do something. E.g. Adding grain when the strike temperature is reached. Mash-Out Alarm when you're ready to sparge, Salt / Hop additions when you've reached the boil. As well as hop stand additions or chilling instructions. All of this at the touch of a button that is preprogrammed to what you want to do. No more egg timers, no more phone timers. Everything controlled by the one area.Bluetooth Gateway DeviceKegLand is currently developing various bluetooth devices such as KL24334 RAPT Bluetooth Thermometer (low energy BLE) other sensors which will be compatible with this brewery. This brewery is able to receive the BLE beacons and relay this information onto the RAPT portal. Also by receiving multiple BLE thermometer sensors the Brewery is able to make smater and more automated decisions on how to control the brewing or distillilation process. For example a BLE thermometer can be placed into your coolant water so you get an alarm if the temperature is too high, a BLE thermometer can be put into the middle of the malt pipe so you can more accurately control elements switching on/off to achieve a core malt pipe temperature etc.Improved Base Design with Easy Access PumpThe new base design means we have sealed all the electronics on the underside of the brewery into a separate junction box. This has allowed us to omit the bottom cover. This significant design change means that the pump can be accessed much more easily. It also means the plumbing can be changed more easily too. For instance you can re-arrange the plumping to the pump to pump into the tap outlet or change this so the tap outlet bypasses the pump. These changes make it more flexible but also much easier to take apart the pump for cleaning and maintenance if required.RAPT Controller with Full Colour ScreenThe new RAPT controller has an easy to read full colour screen. The controller can also be disconnected easily making wash down easier. The controller is mounted in a higher position with a tilting frame so you can angle the screen toward you depending on how tall you are. The new controller module is packed with features and KegLand is consistently updating firmware to include more features. Firmware updates are quick and painless and with a single click you can upgrade all Gen 4 units to the latest firmware to take advantage of new features and accessories. Forget getting on your knees mid-brew, do it all while standing or sitting next to your BrewZilla.The controller can also activate the pump. Meaning there are no toggle switches anywhere on the BrewZilla Gen 4.IEC Cable for Easy StorageThe new design has a removable IEC cable so you can unplug the cable making it more neat for storage.Improved Lid HandlesThe new lid handles are better designed and made from stainless so they are more robust and more ergonomic to hold especially with wet hands.Two Stage Oversized Malt PipeThis new malt pipe design is 30% larger meaning you can mash more grains and either make more beer or make higher gravity beers. the new malt pipe also has a two stage height adjustment so you hand half lift the malt pipe and set on the supporting halo ring halfway up. This makes it more ergonomical so you can lift the heavy malt pipe up in two stages but has the second advantage that it makes the brewery more suitable for smaller batches too where raising the malt pipe half way up is preferable.

California Common Lager 5%. An American California Common (Steam beer) with lager yeast and classic Northern Brewer hops. Dry Hopping gives lovely aroma (Optional). The Recipe Kit gives 10L beer (ca 28pcs 33cl) at 5% ABV.

Recipe Kit for 20L California Common Lager. Perfect if you have a brewery or other equipment for crushed malt.

The Cannular is a Semi-Auto Pro Model that makes canning easier. Now you don't even have to pull a lever back and forth to seam the can. The seaming process takes only 3 Seconds!  That's crazy fast. No spacers are needed for different cans. NOTE: CDL 202 can lids Only.In its standard design the Cannular Semi-Auto can handle 33 cl and 50 cl aluminium cans with can ends type CDL 202. Whether you're a cool bar wanting to fill your own crowlers or you are a home brewer wanting to keep your home brew fresh and protected from damaging light, the Cannular is the answer.  The Cannular can seamer is one of the most compact and easy to use benchtop can seamers around.  With a single operator you can seam/seal the cans in 3 seconds meaning this compact machine is suitable for small breweries or brewpubs doing small production runs.Semi-Auto DesignThis new Semi-Auto Model of can seamer is able to guarantee you get a consistent seaming process every time. Unlike our less expensive manual can seamer this machine has no lever meaning it's even easier for the operator to seam the can consistently and will not vary on how hard the operator is pulling the lever.  Once the machine is tuned only a small amount of oil on the bearings is required and no other maintenance for 50,000 cans.  Safe To Use with Low Voltage Power SupplyIf you have ever used a can seamer you would know that you can sometimes spill liquids while processing cans.  As a result, we have made the Cannular machine with 24v DC so even when you make a mess you don't have a risk of electrocuting yourself.  This also makes the machine easier to clean and wash down.Environmentally FriendlyWhen compared with disposable glass bottles cans are much more environmentally friendly as they are:* Significantly lighter making them less energy-consuming to transport* More recyclable, more cost-effective to recycle, and a higher percentage of cans get recycled in Australia when compared with glassGreat For Outdoor EventsCans are a fantastic choice for outdoor events, parties, pool events, or at the beach.  Broken glass can be dangerous and difficult to clean up completely. Cans on the other hand are the safest choice in this respect.Preserve the Products Quality and FreshnessGas Barrier - Although a glass bottle is completely airtight, the crown seals allows a small migration of CO2 out of the beverage and allows small amounts of oxygen to get ingress as the rubber seal is permeable.  So as a packaging solution glass bottles are imperfect and the product quality will degrade more rapidly due to this gas migration. Aluminium cans have a hermetic metal on metal seal that is impervious to gas transmission.Light Block - Many beverages especially beer can get damaged quickly due to light.  If you expose many beers to sunlight for even 5 minutes the beer can become light damaged ("skunked").  Even softer light such as indoor lights will damage beer over time and noticeable skunking can occur with both incandescent and fluorescent light globes within hours.  So unless you keep your glass bottles in the dark all the time you will compromise the beer quality.  Aluminium cans solve this problem by blocking 100% of damaging light.InfoMotor: 24V(DC). AC adapter included (Anderson plug type 40A).Powered by: 220 - 240 V (AC) / 50 - 60 HzRotational speed: over 3300 rpmHeight adjustment: 60 - 200 mm, (no need to use different spacers for different can heights)Size:355 mm deep230 mm wide495 mm heighWeight: 28 kg

The wine set for the production of 21 liters of regular Italian table wine found in Tuscany. With the Sangiovese grape as the base, the wine gets a robust character and a deep red color. The batch produces a dry, medium-sized wine with low oxygen content. The wine can be drunk immediately after fermentation is complete, but gains in 1-2 months of storage. Yeast and chemistry included.Ingredients: Concentrate for grape juice, sugar, water, preservative E223 wine yeast, yeast stop (E223, E202) Kiesel Oil Chitosan Allergy: Contains sulfides and products based on shellfish

Copper counter-flow chiller cools the wort by running cold water counter-currently in a hose around a stainless steel tube with the wort.solids. The connectors are approximately 9.5 mm (3/8") outer diameter and fit 3/8" john guest/duotight/pushfit or hose with hose clamps. The cold water loop is black rubber. These can be used with gravity but are recommended to be used with a pump. This includes:- Counter Flow Chiller 10m copper

Stainless steel counter-flow chiller cools the wort by running cold water counter-currently in a hose around a stainless steel tube with the wort.solids. The wort loop connectors are approximately 9.5 mm (3/8") outer diameter and fits 3/8" john guest/duotight/pushfit or hose with hose clamp. And the cold water loop has nipples approximately 10mm in diameter. These can be used with gravity but are recommended to be used with a pump. This includes:- Counter Flow Chiller 10m

Galaxy IPA 6,5% Recipe Kit 10L

Without Chiller. The G30v3 is an all-grain brewing system with a 30L (8 US Gal) capacity, designed to make up to 40 pints (23L or 6 US Gal) of high-quality beer from one brew. With app integration, innovative features, and an intuitive design, it’s perfect for both beginner and experienced brewers.Features- Sleek 304 grade stainless steel body- Manage your brew day from your mobile device via Bluetooth using the Grainfather App- Get a more reliable connection between your G30v3 controller and the Grainfather App on your smartphone with the GCAST Bluetooth Wi-Fi Bridge- A robust magnetic drive pump for maximum brewing efficiencies- NEW perforated grain basket negates the need for a top plate or additional pipework (up to 9kg malt)- NEW auto reset switch avoids the need to get underneath the unit should an unexpected trip occur- Unlock distilling capabilities with the Still Spirits Alembic Dome & Condenser- Backed by a 3-year warranty- EU-version power cord (UK power cord NOT included).SIZE:685 x 386mm (27 x 15’’)WEIGHT:14.6kg (32lb)MAX PREBOIL VOLUME:30L (8 US Gal)BATCH VOLUME:Max: 25L (7 US Gal)Min: 10L (3 US Gal) GRAIN BILL:Max: 8kg (18lb)*Min: 1.5kg (3.3lb)*9kg (20lb) with top plate POWER:2000W, 220VCONNECTIVITY:Bluetooth ControlInstructionsClick here

The G30v3 is an all-grain brewing system with a 30L (8 US Gal) capacity, designed to make up to 40 pints (23L or 6 US Gal) of high-quality beer from one brew. With app integration, innovative features, and an intuitive design, it’s perfect for both beginner and experienced brewers.Features- Sleek 304 grade stainless steel body- Manage your brew day from your mobile device via Bluetooth using the Grainfather App- Get a more reliable connection between your G30v3 controller and the Grainfather App on your smartphone with the GCAST Bluetooth Wi-Fi Bridge- A robust magnetic drive pump for maximum brewing efficiencies- NEW perforated grain basket negates the need for a top plate or additional pipework (up to 9kg malt)- NEW auto reset switch avoids the need to get underneath the unit should an unexpected trip occur- Counter flow wort chiller which can cool wort to less than 20°C within approx 20-30 minutes.- Unlock distilling capabilities with the Still Spirits Alembic Dome & Condenser- Backed by a 3-year warranty- EU-version power cord (UK power cord NOT included).SIZE:685 x 386mm (27 x 15’’)WEIGHT:14.6kg (32lb)MAX PREBOIL VOLUME:30L (8 US Gal)BATCH VOLUME:Max: 25L (7 US Gal)Min: 10L (3 US Gal) GRAIN BILL:Max: 8kg (18lb)*Min: 1.5kg (3.3lb)*9kg (20lb) with top plate POWER:2000W, 220VCONNECTIVITY:Bluetooth ControlInstructionsClick here

Hersprucker Lager 5% Recipe Kit 10L

Recipe Kit for 20L German lager. Perfect if you have a brewery or other equipment for crushed malt.

Hersprucker Weissbier 4,7% Recipe Kit 10L

Recipe Kit for 20L classic German Weissbier with Hersprucker hops. Perfect if you have a brewery or other equipment for crushed malt.

Fully assembled kit with Ball lock coupling and overpressure valve with manometer. If you want to ferment under pressure on e.g. FermZilla, this is the solution for you! The adjustment screw on the valve makes it easy to increase or decrease the set pressure.The parts can be easily disassembled for cleaning. Including: 1x BlowTie 2 Spunding Valve with 0-15psi pressure gauge (can be replaced)1x Duotight 8mm (5/16") Ball Lock for CO21x Intermediate piece 8mm (5/16")

This awesome compact solution for adjusting water and gas pressure can be useful in many different applications.  With Manometer 0-10 bar (0-150 psi). This can be used for compressed air, CO2, nitrogen, mains water supply and many other things.The unit is made from food grade engineering plastic, stainless steel and quality made EPDM seals. These compact inline regulators have been designed to suit 8mm (5/16") Evabarrier Tubing.  For higher pressures such as mains water supply we recommend the 4mm ID Tubing here or 5mm ID here if you do not need as high pressures and you would prefer higher flow rate.Suits pressures 0-150psi (0-10 bar)Suitable for mains water pressureSuitable for liquid or gasMade from Acetal/POM, EPDM o-rings and stainless teethSuits 6.35mm (1/4") OD Tubing such as our Evabarrier TubingIncludes integrated manometer 0-10 bar (0-150 psi) Pressure Gauge

Powerful and quiet 19L/min magnetic pump capable of handling water/wort up to 140°C. Perfect for recirculating wort or drinking water. Stainless Steel Head.Do not run the pump dry.Specifications Magnetic Pump MP-15 Stainless Steel HeadCapacity: max 19 L/min (60Hz)Head: max 3,4 meters (60Hz)Power rating: 10WConnections: 1/2" NPT threaded males on both input and output (NPT/FPT)Voltage: 220-240V (50-60Hz)Protection: Class BPower cable: C13-plug (EU-version power cord (UK power cord NOT included))Note: Do not run the pump dry

Easy-to-use magnetic stirrer with good capacity of 1,5 liters (and more). Infinitely variable speed and durable construction that can withstand a little spill.Material: Durable cover.Speed: 0-1500 rpm.Capacity: 1.5 liters.Power supply: 230VMax Power: 8W

Thousands of food and beverage professionals and hobbyists, from chefs and food quality professionals to brewers and wine makers, have moved to digital MA885 Digital Brix / °Oechsle (°Oe) and °KMW (°Babo) meter for measurement of must and grapes from less accurate and less precise optical refractometers. Batteries are included.The Milwaukee digital Brix/°Oechsle (°Oe) / KMW (°Babo) refractometer is temperature compensated with a 0 to 50% Brix / 0 to 230°Oechsle °Oe) 0 to 42 / °KMW (°Babo) range and +/- 0.2% Brix / +/-1°Oechsle / +/-0.2 °KMW accuracy. It is easy to use with simple two button operation and fast with a response time under 2 seconds. Maintenance is a breeze also with an easy-to-clean sealed flint glass prism and stainless steel well. The MA885 eliminates the uncertainty of optical refractometers by providing and accurate digital readout.DESIGN FEATURES- Fast, accurate results with digital dual level LCD readout.- Easy measurement with just 2-3 drops of sample needed and results less than 2 seconds.- Simple one-point calibration using distilled or deionized water.- Easy to clean, stainless steel sample well with unit rated to IP65 as "dust tight" and protected against water jets.- Battery percent level indicator with automatic shut-off (batteries included).- Ideal for winemakers, brewers, syrup producers, food producers and many other applications.- The conversion used is based on the ICUMSA Methods Book (International Commission for Uniform Methods of Sugar Analysis).SPECIFICATIONSRange: 0 to 50% Brix | 0 to 230°Oechsle (°Oe) | 0 to 42 °KMW (°Babo)| Temperature 0 to 80°C / 32 to 176°FResolution: 0.1 Brix | 1°Oechsle (°Oe) | 0.1 °KMW (°Babo) | 0.1°C / 0.1°FAccuracy: ±0.2% Brix | ±1°Oechsle (°Oe) | ±0.2°KMW (°Babo) | ±0.3°C / ±0.5°FLight Source: Yellow LEDMeasurement Time: Approximately 1.5 secondsMinimum Sample: Volume 100 µL or 2 metrics drops (cover prism totally)Sample Cell: Stainless steel ring and flint glass prismTemperature Compensation: Automatic between 10 and 40°C / 50 to 104°FEnclosure rating: IP65Case Material: ABSBattery Type: 1 x 9V AA (included)Battery Life: 5000 hours reading with auto-shut off after 3 minutes of non-useDimensions Meter: 7.6 x 4.0 x 2.64 inches (192 x 102 x 67 mm)Weight Meter: .93 lbs. (0.42 kg)Dimensions Package: 11 x 6.8 x 4.60 inches (268 x 172 x 118 mm)Weight Packaged: 1.46 lbs. (0.66 kg)WHAT PEOPLE ARE SAYING"Anyone who produces wine, grape juice, maple syrup or craft beer should find this product one of the best investments they make on any piece of equipment.""I am in love with this instrument. No more large samples. No more phony readings from badly made refractometers.""Dramatically improved my commercial brewing consistency & efficiency. Now I can quickly stop my sparge when I get to to my OG.""I used this for finishing Maple Syrup. I had been trying to determine sugar content using temperature and a hydrometer. I found both very difficult to use. The refractometer was much easier."

The Milwaukee Waterproof pH55 PRO pH/Temp Tester with ATC is one of our most accurate cost effective, well rounded, rugged and reliable testers in the market featuring dual level LCD readouts, easily replaceable probe and extended pH ranges to meet almost any application. It's simple 1 or 2 point automatic calibration is simple-to-use and offers TWO sets of memorized buffers to select.  Ideal for use in aquariums, hydroponics, horticulture, education, pools, beer and many other applications.DESIGN FEATURESFast easy to read results with large digital LCD readout.Extreme pH accuracy to  ±0.1 pH with an extended pH range (-2.0 pH to 16.0 pH).Resolution to 0.1 pH.Lightweight and portable.Easy measurement: just place the probe in the sample, gently stir, wait for the stability indication to show a stable reading and then freeze the reading.Simple Automatic one or two-point calibration.2 Sets of pre-memorized buffers.Gel-filled, double junction pH electrode for low maintenance and high performance.Over 300 hours of battery life (batteries included).Fully waterproof to IP65.Replaceable pH electrode Mi56P.SPECIFICATIONSpH Range: -2.0 to 16.0 pHTemperature Range: -5.0 to 60.0°C (23 to 140°F)pH Resolution: 0.1 pHpH Accuracy: ±0.1 pHTemperature Accuracy: ±0.5°C (±1°F)Typical EMC Deviation: ±0.1Typical EMC Temperature Deviation: ±0.3°C (±0.6°F)Temperature Compensation: Automatic from -5 to 60°C (23 to 140°F)Calibration Automatic: 1 or 2 points with 2 sets of pre-memorized buffers (pH 4.01, 7.01, 10.01) or (pH 4.01, 6.86, 9.18)Probe: Replaceable double junction for extended life (Mi56P)Environment: -5 to 50°C / 23 to 122°F; max RH 100%Battery Type: 4 x 1.5V; IEC LR44, A76 (included)Battery Life: Approx. 300 hours of useAuto-off: after 8 minutes on non-useDimensions: 254 × 67 × 47 mmWeight: 99.22 gCARE AND USEAll pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH Tester will give you fast, accurate results for longer.Here are our top four tips. 1. Always store with the cap full of buffer or storage solution MA9015 not water.2. Clean your Tester regularly by soaking in cleaning solution MA9016.3. Calibrate after cleaning and/or storage before testing to adjust for changes in the pH sensor.4. Gently stir the Tester in the sample for a faster result.

Powerful and quiet 10L/min magnetic pump capable of handling water/wort up to 90°C. Perfect for recirculating wort or drinking water.Do not run the pump dry.SpecificationsCapacity: max 10 L/min (60Hz)Head: max 6 meters (60Hz)Power rating: 18WConnections: 1/2" BSP threaded males on both input and output. Includes 1/2" barbs for hoses with ca 12mm inner diameter.Voltage: 12V DC (50-60Hz)Protection: Class BNote: Do not run the pump dry

Russian Imperial Stout 10% Recipe Kit 10L

Russian Imperial Stout 10% Recipe Kit 20L