Pumps

Magnetic Pump MP-10RN, spare part for Brewly Breweries, also fits other breweries. Up to 12L/min. Very quiet, high quality, powerful magnetic pump that can handle wort/water up to 100°C, however its not recommended under sustained periods. Perfect for recirkulating wort and transfer of wort/drikning water. Standard 14mm inlet/outlet.Do not run the pump dry.Specifications Brewly Magnetic Pump MP-10RNCapacity: max 12 L/min (60Hz)Head: max 2,1 meters (60Hz)Power rating: 6WVoltage: 220-240V (50-60Hz)Protection: IP44Tube Interface Inlet: 14 mmTube Interface Outlet: 14 mmNote: Do not run the pump dry

Brewly MP-15RN Magnetic pump 10W, IP44. 5/8" (16mm) input and 5/8" (16mm) output (points upward), not threaded.

Complete silicone tube kit for connecting the tubes and pump at the bottom. SPARE PARTS

Spare part pump MP-10RN for Coobra CB3 & CB5. Standard 14mm input/output. Standard pump for many breweries. Colours may vary.

Grainfather Magnetic Pump MP-10RN with C14 plug. Original. Standard 14mm input/output.

Grainfather Pump & Adapter for Conical Fermenter. NOTE! Spare part.

Upgrade your 65L BrewZilla Gen 4 with the all new barbed magnetic driven pump. This pump comes standard with the 100L BrewZilla Gen 4. This model was once a Green Demon (Green Colour), it has now been switched over to a Grey Goblin (Gun Metal Grey Colour). To upgrade the 65L BrewZilla Gen 4, you will need to perform some light electrical terminal rewiring. This pump comes prefitted with blade and circle connectors to swap out the standard 6 watt pump. You will need to re-use the grommet fitting so be gentle when taking it off the 6w pump. Please see product photos for particular configurations, standard config using ball valve, or Oli's Hail Mary configuration (braided hosing sold separately). Standard Configuration - No additional fittings/hoses requiredThis configuration is a direct swap out of the 6w pump to the 25w pump. Utilising the tee splitter and the original hosing that comes with the 65L Gen 4 BrewZilla.It does help a little bit if you use the outlet elbow piece on the inlet, and vice versa as the 25w pump is slightly taller than the 6w stock standard pump. Alternative Configuration ~ Oli's Hail MaryFor this method you will need about a 165mm piece of 12mm ID hosing, preferably braided. You cannot use normal silicone hosing for this. This method does not use the tee piece of ball valve. It solely relies on the bigger 25w pump to do all of the transferring/recirculating needs.Please see product photos for configuration types. This pump can also be used around your brewery, but you will need an electrician to fit a 10a plug to it. Capable of withstanding temperatures up to 120C it can handle the boil directly without the need to cool before use. Extremely efficient 1.1amp pump which can be run continuously at elevated temperatures.  Specifications:Voltage: 220-240 at 50-60hzMax Head: 3.4mMax Flow: 19L/minWiring: Fork and Ring Connectors fitted with insulation sheath.Fittings: 13mm Male BarbNOTE: Like almost all centrifugal pumps, do not run this pump dry.

Powerful and quiet 19L/min magnetic pump capable of handling water/wort up to 140°C. Perfect for recirculating wort or drinking water. Plastic Head.Do not run the pump dry.Specifications Magnetic Pump MP-15RMCapacity: max 19 L/min (60Hz)Head: max 3,4 meters (60Hz)Power rating: 10WConnections: 1/2" threaded males on both input and outputVoltage: 220-240V (50-60Hz)Protection: Class BPower cable: C13-plug (EU-version power cord (UK power cord NOT included))Note: Do not run the pump dry

Powerful and quiet 19L/min magnetic pump capable of handling water/wort up to 140°C. Perfect for recirculating wort or drinking water. Stainless Steel Head.Do not run the pump dry.Specifications Magnetic Pump MP-15RM Stainless Steel HeadCapacity: max 19 L/min (60Hz)Head: max 3,4 meters (60Hz)Power rating: 10WConnections: 1/2" BSP threaded males on both input and outputVoltage: 220-240V (50-60Hz)Protection: Class BPower cable: C13-plug (EU-version power cord (UK power cord NOT included))Note: Do not run the pump dry

Plastic Head for Magnetic Pump MP-15RM (spare part).