Accessories

Hop filter in stainless steel, perfect for dry hopping beer in Cornelius kegs or fermenters. Loop for hanging it. Length: 18cm. Diameter: 7cm. Mesh size: 300 microns

Hop filter in stainless steel, perfect for dry hopping beer in Cornelius kegs or fermenters. Loop for hanging it. Length: 29cm. Diameter: 7cm. Mesh size: 300 microns

Isolation Jacket for Cornelius Keg 18-23L. Neoprene.Note: Cornelius keg is not included.

This fantastic product has been designed by KegLand so you can dispense kegs on the run.  Don't bother bringing people to the bar, now you can take the kegs to the people. This awesome keg backpack is the only one of it's type in Australia and it's exclusive to KegLand. Cylinder, keg, and regulator sold separately. The JetKeg is an exclusive KegLand product that enables you to walk through a crowd and dispense a whole keg in far less time than what it would take for each person to come up to the bar.  It's a backpack designed to dispense and keep a keg cold. Great for parties, public events, caterers, or any even that requires many drinks to be dispensed in a short period. Ever been to a music festival and wanted to take your awesom kegged product but cant be bothered luging around all the gear.  The JetKeg solves this problem.  Turn up to the event with one of these and you will be an instant legend. This product has been designed with durable buckles, strong nylon straps, waist strap and fully hot tape seamed internal lining that is waterproof so no dripping water all over the floor. JetKeg Pack Includes:1 x JetKeg Back Pack1 x Black Nylon Pluto Gun (duotight compatible)1 x 6.5mm x 8mm duotight reducer (for pluto gun)1 x PreCut length of 4mm x 8mm EVABarrier HoseDoes not include gas fittings or disconnects/coupler This product has been designed to take a 19L Corny Brewing Keg or a 20L commercial keg (pony keg) which are sold searpately.

The filter prevents hop residue etc from beeing sucked up into the silicone hose of the FermZilla Float. Made from HDPE and 304 Grade stainless steel this product can be boiled or sanitized with most detergents.The float can be mounted in three different places on the filter, to determine how close to the surface you want to suck up liquid.Dimensions: 40.5 x 27 mm. Hose holder diameter: 7.20 mm, perfect for 6mm inner diameter silicone tube/hose. Materials: Stainless steel and plastic. design may vary.

The Duotight Flow Stopper - Automatic Keg Filler (KL09393) is an fantastic device designed to streamline the keg filling process for homebrewers. This product,  offers a hassle-free method of filling kegs, or transferring between kegs during filtering or after fining. It is particularly useful because it attaches to the gas post of your keg and automatically cuts off the flow once the keg is full, thus preventing overfilling and spillage of beer. Some of its key features include compatibility with Duotight fittings, ensuring a secure and leak-free connection, and the ability to work with a BlowTie spunding valve. When used with the BlowTie, it allows you to apply head pressure to the keg, enabling control over the flow speed and reducing foam during the filling process.For this setup, a short length of 8 mm OD EVABarrier tubing is required to connect the BlowTie to the outlet of the Flow Stopper. This flow stopper includes:2 x duotight 5/8" thread x 8mm pushfit (for hose)1 x duotight Elbow pushfit 8mm1 x duotight straight 8mm pushfit x 7/16" thread for threaded ball lock1 x ball float1 x stainless spring1 x acrylic sight glass (with 5/8 male thread on either side)*Colours of the floating ball and joiners may vary. You need to buy a ball lock with a thred if you do not have one. 

Kegland Oxygen Flow Meter with 8mm Duotight. Pure oxygen is the best way to get your yeast off to a cracking start. Simply use this high pressure and high capacity disposable tank to boost dissolved oxygen levels in your cooled wort.Oxygen is great for use with high gravity beers or pilsners where you are trying to build up a large population of yeast.We would recommend the use of a diffusion stone. These small diffusion stones create very fine bubbles of oxygen in your wort and help the oxygen to dissolve into solution faster. If you want a really nice optoin we would recommend the use of this oxygenation wand and this is a bit more erganomic as you have a rigid stainless tube to force the stone to the bottom of the fermenter rater than it floating to the surface.This flow control device is designed to be used with our oxygen cylinder and regulator that can be purchased separately.InstructionsAttach the regulator to to the top of your disposable cylinder. Turn pressure up to 1-10psi. Immerse diffusion stone in wort for 1-2 minutes. Then dial the flow meter up to 1.0L/min. The time it takes to saturate will depend on volume, temperature, depth of vessel, and type of stone (0.5mm recommended)NOTE: Wort must be cold. It is extremely difficult to get oxygen to dissolve into hot wort so it's essential to cool wort completely before starting this process.

This pressure kit is so you can convert the 29 and 58L Kegmenters into either pressure rated fermenters or use the Kegmenters as ball lock kegs. This lid comes with a red pressure relief valve (that opens at 2.5bar - compatible thread to cornelius type PRVs). The lid has accurately machined gas and liquid posts.This lid is ideally suited to also fermenting under pressure so you can use a spunding valve/adjustable pressure relief valve so you can naturally carbonate during primary fermentation.It should be noted that we now make this lid with a 60cm silicon dip tube with a stainless fload. This innovative design means when you draw liquid from this kegmenter the liquid will always be drawn from the top 2.5cm of liquid meaning only the clearest wort/beer will be drawn from the kegmenter. This is particulrly useful if you are dispending directly from the fermenter or simply want to separate clear liquid from sediment which has sunken to the bottom of the kegmenter.

Spare part. This is a safety device for KL06972 Mini Keg Tapping Head Kits. It has a 1/4" BSP threaded bottom to Cornelius Pressure Relief Valve thread type on top.

O-ring for Cornelius Keg Lid

O-ring for Cornelius Keg Valves. 1pc.

Sturdy, but elegant metal CO2 beer dispensing tap for 5-liter mini kegs. One 16 gram CO2 cartidge is used for each keg. The CO2 replaces the beer tapped from the keg and protects against oxidation until the keg is consumed.CO2 cartridges sold seperately.

Polyethylene (LDPE) food grade tubing for both liquid and CO2. Fits Pushfit, Fluidfit and John Guest (JG) connectors.1/2" (12.7mm) outer diameter och 3/8" (9,5mm) inner diameter.Price per meter. If more than one meter is ordered, its delivered in one piece.

Polyethylene (LDPE) food grade tubing for both liquid and CO2. Fits Pushfit, Fluidfit and John Guest (JG) connectors. Temperature range: -45 till +60 °C.Outer diameter: 1/2" (12.7mm)Inner diameter: 3/8" (9,5mm)Price per meter. If more than one meter is ordered, its delivered in one piece.

Polyethylene (LDPE) food grade tubing for both liquid and CO2. Fits Pushfit, Fluidfit and John Guest (JG) connectors. Temperature range: -45 till +60 °C. Outer diameter: 1/4" (6,35 mm)Inner diameter: 4,3 mm Price per meter. If more than one meter is ordered, its delivered in one piece.

Polyethylene (LDPE) food grade tubing for both liquid and CO2. Fits Pushfit, Fluidfit and John Guest (JG) connectors. Temperature range: -45 till +60 °C. Outer diameter: 1/4" (6,35 mm)Inner diameter: 4,3 mm Price per meter. If more than one meter is ordered, its delivered in one piece.

Polyethylene (LDPE) food grade restrictor tubing for both liquid and CO2. Provides additional pressure drop to prevent excess foaming.Inside diameter: 1/8" (3.2 mm)Outside diameter: 3/16" (4.8 mm)Price per meter. If more than one meter is ordered, its delivered in one piece.

Polyethylene (LDPE) food grade restrictor tubing for both liquid and CO2. Provides additional pressure drop to prevent excess foaming. Inside diameter: 1/8" (3.2 mm)Outside diameter: 3/16" (4.8 mm) Price per meter. If more than one meter is ordered, its delivered in one piece.

Polyethylene (LDPE) food grade restrictor tubing for both liquid and CO2. Provides additional pressure drop to prevent excess foaming. Inside diameter: 1/8" (3.2 mm)Outside diameter: 3/16" (4.8 mm) Price per meter. If more than one meter is ordered, its delivered in one piece.

Polyethylene (LDPE) food grade restrictor tubing for both liquid and CO2. Provides additional pressure drop to prevent excess foaming. Inside diameter:  1/4" (6,7 mm)Outside diameter: 3/8" (9,5 mm) Price per meter. If more than one meter is ordered, its delivered in one piece.

Polyethylene (LDPE) food grade restrictor tubing for both liquid and CO2. Provides additional pressure drop to prevent excess foaming. Inside diameter:  1/4" (6,7 mm)Outside diameter: 3/8" (9,5 mm) Price per meter. If more than one meter is ordered, its delivered in one piece.

Polyethylene (LDPE) food grade restrictor tubing for both liquid and CO2. Provides additional pressure drop to prevent excess foaming. Inside diameter:  1/4" (6,7 mm)Outside diameter: 3/8" (9,5 mm) Price per meter. If more than one meter is ordered, its delivered in one piece.

Polyethylene (LDPE) food grade restrictor tubing for both liquid and CO2. Provides additional pressure drop to prevent excess foaming. Inside diameter:  1/4" (6,7 mm)Outside diameter: 3/8" (9,5 mm) Price per meter. If more than one meter is ordered, its delivered in one piece.

Polyethylene (LDPE) food grade restrictor tubing for both liquid and CO2. Provides additional pressure drop to prevent excess foaming. Inside diameter:  1/4" (6,7 mm)Outside diameter: 3/8" (9,5 mm) Price per meter. If more than one meter is ordered, its delivered in one piece.

Polyethylene (LDPE) food grade tubing for both liquid and CO2. Fits Pushfit, Fluidfit and John Guest (JG) connectors. Temperature range: -45 till +60 °C. Outer diameter: 5/16" (8 mm)Inner diameter: 5,4 mm Price per meter. If more than one meter is ordered, its delivered in one piece.

Polyethylene (LDPE) food grade tubing for both liquid and CO2. Fits Pushfit, Fluidfit and John Guest (JG) connectors. Temperature range: -45 till +60 °C. Outer diameter: 3/16" (4,8 mm)Inner diameter: 3,2 mm Price per meter. If more than one meter is ordered, its delivered in one piece.

Polyethylene (LDPE) food grade restrictor tubing for both liquid and CO2. Provides additional pressure drop to prevent excess foaming. Inside diameter: 1/8" (3.2 mm)Outside diameter: 3/16" (4.8 mm) Price per meter. If more than one meter is ordered, its delivered in one piece.

Pressure Relief Valve, releases at ca 2,4 bar. Gasket included.

Pressure Relief Valve, releases at ca 1 bar. Gasket included.

Relief Valve that fits the lids of Cornelius kegs, releases at ca 8 bar. Gasket included.

Rubber stopper with center plug for five-liter mini Party kegs. Grey. Can be reused. UsageWhen you insert the stopper in the keg, push down around the outer edge. If you push down on the center plug, it may fall into the keg. When it's time to start serving beer, push the dip tube of the dispenser through the rubber stopper. The dip tube seals against the rubber stopper and the center plug falls into the keg.

Rubber stopper with center plug and 2,5-bar pressure relief valve for 5-liter mini Party kegs. Grey. Can be reused.UsageThe pressure relief valve opens automatically if the pressure exceeds about 2.5 bar, to protect the keg from too high pressure which might otherwise occur during keg conditioning / priming.When you insert the stopper in the keg, push down around the outer edge.If you push down on the center plug, it may fall into the keg.When it's time to start serving beer, push the dip tube of the dispenser through the rubber stopper. The dip tube seals against the rubber stopper and the center plug falls into the keg.

Rubber valve plug Red-Black for 5L Party kegs (mini kegs) with an integrated faucet. Made for single use. May be opened to allow air into the keg, so the beer will pour when the faucet is opened.

Spring for relief valve for Cornelius keg

This Hose Kit that makes it very easy to rinse kegs with water. Its also perfect if you want to fill a keg with water for making sparkling water. Fits ball lock cornelius kegs, and other kegs with ball lock disconnects. The threaded ball lock disconnects fits both gas and liquid (beer) ball lock posts. Here's how you can clean Cornelius kegs:1. Release the excess pressure in the keg and open the lid. Empty if there is any left.2. Connect the gardena coupling to a water tap and the ball-lock disconnect to the keg.3. Place the keg upside down in the sink and start the hot water. Leave to rinse for a few minutes.4. Set the barrel up and fill up with hot water and add e.g. PBW.5. Replace the lid and flush some detergent through both gas and liquid posts and the safety valve. Leave for about 15 minutes.6. Release the excess pressure and open the lid. Empty the cleaning agent (or transfer to the next keg if you are cleaning several at the same time).7. Connect the gardena coupling to a water tap and the disconnect to the keg.8. Place the keg upside down in the sink and start the hot water. Leave to rinse for a few minutes.9. Sanitize the keg with e.g. Star San just before filling the next batch. Tip: Buy a threaded PET adapter and you can also easily rinse your beer lines too.

This trapets adapter in nickel plated brass allows you to attach 425 g aluminum CO2 cylinders to a CO2 regulator with standard W21.8x1/14" threads.Version 2.3 features a spring pressure screw, that makes it no longer necessary to make adjustments for different brands of CO2 cylinders in most cases.Comes equipped with a safety vent hole to minimize the risk of damaging the gasket when unscrewing it from the CO2 cylinder with remaining pressure.Made in Sweden.

Valve Beer/Liquid Ball-lock for Cornelius keg.

Valve CO2 Ball-lock for Cornelius keg

FermZilla 60cm silicone dip tube and stainless float. Ensure that only the top layer of beer is poured from the Fermzilla/Fermentasaurus.

Add this pressure kit to your FermZilla 27L, 35L or 55L and turn your FermZilla into a true uni tank that can be used for carbonating beer. Stainless steel.This inexpensive upgrade will truly show you what the FermZilla was designed for. Here are some possibilities:Fermenting Under Pressure:First one of the most intriguing uses is to ferment under pressure which reduces ester production and fusel alcohol production. That means that you can ferment warmer than you normally would, even making lagers at room temperature. Most commercial beer is fermented under pressure just due to the size of commercial tanks and the pressure that is created by the column of beer. It is one of the differences between commercial brewing and homebrewing. The lid has a built in relief valve that will blow at 35psi and we strongly recommend you also purchase an adjustable pressure relief valve, or blow tie kit, that allows you to set a lower pressure. It is also always a good idea to have two relief valves on the FermZilla anytime the unit is under pressure. Carbonating, Pushing, and Serving:When you are fermenting under pressure the beer is already carbonated when you are done fermenting. You can control the level of carbonation by using an adjustable pressure relief. The idea is that the FermZilla can eliminate kegging and you can serve directly from the fermenter. We love this idea but there will probably still be times that you want to keg. Use a beer line to connect the FermZilla to your keg and enjoy the easiest kegging experience ever. You can also choose to send carbonated beer through a beer filter on the way to your keg. When applying pressure with a CO2 tank also make sure that you have a functional relief valve on your CO2 regulator. Lack of OxidationBecause the beer always has a CO2 blanket through fermentation and during any transfers out, oxidation is eliminated. When you cold crash you won't be sucking air back in through an airlock. Key Features:• Ferment beer under pressure to reduce ester and fusel alcohol production• Ability to always draw clear beer with the unique, floating draw tube • Keg already carbonated beer• Use co2 to push beer into a keg or though a filter into a keg• Carbonate and serve beer directly from the FermZilla, eliminating kegging all togetherFermZilla Stainless Pressure Kit includes:- 2 x Carbonation Screw Caps with barb- 1 x FermZilla 27L, 35L & 55L SS Floar & 60cm Silicone Dip Tube

Fluidfit® HCF 1/4" push-fit connection with female 3/4" BSP thread.

Fluidfit® HCF 1/2" push-fit connection with female 1/2" BSP thread.

Gas Manifold - CO2 Manifold 2-Way 1/4" Barb - can be used to connect two kegs to a CO2 cylinder. Outlets can be closed and opened individually with built-in check valves.  - Save money by using a single CO2 tank for multiple kegs.- Inlets and outlets are equipped with 1/4" (6.35mm) nipple (fits 6mm hose).- Behind the nipples there is a 1/4'' thread for e.g. ball locks with NPT thread.- Integrated check valve outlets prevent fluid from flowing into the manifold and your regulator, and fluid migrating from one barrel to another.- No leaks due to thread tape and heavy water testing after installation- Body made of aluminium. Rest made of brass and stainless steel.- Mounting holes allow for easy installation on walls or kegerators.

Gas Manifold - CO2 Manifold 2-Way 1/4" MFL - can be used to connect two kegs to a CO2 cylinder. Outlets can be closed and opened individually with built-in check valves. The input and outputs have MFL threads. These are compatible with quick connectors with FFL threads from DuoTight and John Guest, among others.(Hint: MFL stands for Male-, FFL stands for Female-). - Save money by using a single CO2 tank for multiple kegs.- Inlets and outlets are equipped with 1/4" (6.35mm) MFL (fits 7/16" - 20UNF FFL).- Behind the MFLs there is a 1/4'' thread for e.g. ball locks with MFL thread.- Integrated check valve outlets prevent fluid from flowing into the manifold and your regulator, and fluid migrating from one barrel to another.- No leaks due to thread tape and heavy water testing after installation- Body made of aluminium. Rest made of brass and stainless steel.- Mounting holes allow for easy installation on walls or kegerators.

Gas Manifold - CO2 Manifold 3-Way 1/4" MFL - can be used to connect several kegs to a CO2 cylinder. Outlets can be closed and opened individually with built-in check valves. The input and outputs have MFL threads. These are compatible with quick connectors with FFL threads from DuoTight and John Guest, among others.(Hint: MFL stands for Male-, FFL stands for Female-). - Save money by using a single CO2 tank for multiple kegs.- Inlets and outlets are equipped with 1/4" (6.35mm) MFL (fits 7/16" - 20UNF FFL).- Behind the MFLs there is a 1/4'' thread for e.g. ball locks with MFL thread.- Integrated check valve outlets prevent fluid from flowing into the manifold and your regulator, and fluid migrating from one barrel to another.- No leaks due to thread tape and heavy water testing after installation- Body made of aluminium. Rest made of brass and stainless steel.- Mounting holes allow for easy installation on walls or kegerators.

Gas Manifold - CO2 Manifold 4-Way 1/4" Barb - can be used to connect several kegs to a CO2 cylinder. Outlets can be closed and opened individually with built-in check valves.  - Save money by using a single CO2 tank for multiple kegs.- Inlets and outlets are equipped with 1/4" (6.35mm) nipple (fits 6mm hose).- Behind the nipples there is a 1/4'' thread for e.g. ball locks with NPT thread.- Integrated check valve outlets prevent fluid from flowing into the manifold and your regulator, and fluid migrating from one barrel to another.- No leaks due to thread tape and heavy water testing after installation- Body made of aluminium. Rest made of brass and stainless steel.- Mounting holes allow for easy installation on walls or kegerators.

Gas Manifold - CO2 Manifold 4-Way 1/4" MFL - can be used to connect several kegs to a CO2 cylinder. Outlets can be closed and opened individually with built-in check valves. The input and outputs have MFL threads. These are compatible with quick connectors with FFL threads from DuoTight and John Guest, among others.(Hint: MFL stands for Male-, FFL stands for Female-). - Save money by using a single CO2 tank for multiple kegs.- Inlets and outlets are equipped with 1/4" (6.35mm) MFL (fits 7/16" - 20UNF FFL).- Behind the MFLs there is a 1/4'' thread for e.g. ball locks with MFL thread.- Integrated check valve outlets prevent fluid from flowing into the manifold and your regulator, and fluid migrating from one barrel to another.- No leaks due to thread tape and heavy water testing after installation- Body made of aluminium. Rest made of brass and stainless steel.- Mounting holes allow for easy installation on walls or kegerators.