Fermentation

The Brew Cooler XL is an extra large waterproof, insulated cooling bag to keep correct fermentation temperature in fermenters and kegs up to 30L. Either one 30L fermenter or two cornelius kegs fits inside. Perfect if you dont have space or possibility to place your fermenter in a temperature controlled refrigerator at home.How the Brew Cooler XL worksThe function is simple, place your fermenter or keg(s) inside the Brew Cooler and add frozen water bottles (preferrably plastic) inside the Brew Cooler to reduce and keep the correct fermentation temperature. The volume of frozen water in the plastic bottles determines how many degrees below room temperature the fermenter will be kept at. The frozen water bottles should preferrably be replaced every 24 hours, or when needed.1. Place the Brew Cooler at a suitable location in your home. Place your fermenter with wort inside the Brew Cooler.2. Place the correct number of frozen water bottles inside the Brew Cooler according to the Temperature Chart below.3. Close Brew Cooler zip locks.4. After 24 hours, exchange the frozen water bottles for new ones.Temperature Chart: Choose the correct fermentation temperatureThis chart gives examples of the number and size of frozen water bottles that is needed for a given temperature reduction in the Brew Cooler for 20L beer.One 1-liter bottle reduce 1,5°C.Two 1-liter bottles reduce 3°C.One 1,5-liter bottle reduce 2°C.Two 1,5-liter bottles reduce 4°C.Three 1,5-liter bottles reduce 6°CFour 1,5-liter bottles reduce 8°C.One 2-liter bottle reduce 3°C.Two 2-liter bottles reduce 6°C.Three 2-liters bottles reduce 9°C.Four 2-liter bottles reduce 12°C.These temperature reductions are valid for 20L beer in the fermenter. As can be seen, the temperature reduction is about 1,5°C per liter frozen water. The maximum temperature reduction that can be archieved is about 15°C.Example: If your home ambient temperature is 21°C and you want to ferment 20L ale at 18°C, add one 2-liter or two 1L) frozen plastic water bottle together with your fermenter in the Brew Cooler. Exchange every 24 hours and repeat at least the first 3-4 days during the primary fermentation. If your brew 10L then about half the volume, 1-1.5L frozen water, is enough. What is the correct fermentation temperature?To get your home brew to taste as good as possible its important to control the fermentation temperature. An ale can theoretically be fermented at room temperature, 20-22°C, however it will taste the cleanest when fermented around 18°C, at least the first 3-4 days of fermentation. Lagers should be fermented at 10-12°C. Saisons can be fermented at high temperatures, 20-35°C, depending on the flavour profile you want.Brew Cooler XL 30L specificationsHeight: 70 cmLength 40 cmWidth: 40 cmInternal supports: 60cm Vertical rib supports keeps the bag upright by itself.Material: Tough black polyester with insulation and a grey water proof inner liner.Carrying strap: The Brew Cooler is equipped with an adjustable carrying strap.Note: Fermenters, kegs or other accessories are not included.

Ferment your beer in stainless conical fermeters just like in professional breweries. Rotary racking arm with dip tube provides very good extraction of beer from above the cone. Perfect for batch sizes up to 60L, optimally 20-55L.Brewly CF 60L Conical Fermenter- Material: Polished stainless steel (ANSI 304)- Polished seamless inside for maximum sanitary conditions- 60L capacity (62L to edge)- Thermometer 0-40C (32-104C) with internal thermowell for the sensor.- Mini valve 3/8" with rotary racking arm with dip tube provides very good extraction of beer from above the cone for bottling or transfer to keg.- Dump valve on conical bottom with 3/4" stainless steel valve, perfect for yeast dumping and easy cleaning.- 2 steady stainless steel handles- 3 legs with rubber feet- Airlock with rubber plug- Stainless lid with lock med heavy-duty silicone seal- Diameter: 47 cm- Height: 70 cm- Multiple fermenters can be stacked on top of eachother- Instructions manual in English

Insulation jacket for the Brewly 30L Conical Fermenter (both versions). Material: 5 mm neoprene foam.

The heat pad ensures constant brewing temperature which is crucial for the success of brewing beer, wine or spirits. To be placed under the fermenter. Suitable for fermentation in cold areas such as in a refrigerator or in the basement, garages or on the balcony. Provides a low constant heat to the fermenter which aids yeast activity and helps avoid stuck fermentations.Use preferrably in cojunction with an Universal Thermostat (not included).Features:- Inexpensive to run. - Voltage: 220-240V EU-version power cord (UK power cord NOT included).- Power: 25W- Width: 32 cm- Length: 32 cm

Fermenter made of food grade plastic. Lid and rubber seal for air lock are included. Graded to 12L, 15L maximum.MeansurementsHeight: 32 cmDiameter: 30 cmNote: Fermenter air lock is not included.

Fermenter 15L with lid and tap hole

Fermenter 15L with lid and tap with barb

Plastic lid for 15L fermenter with rubber grommet. Diameter ca 28,5cm

Fermenter made of food grade plastic. Lid and rubber seal for air lock are included. Graded to 25L, 30L maximum.MeansurementsHeight: 44 cmDiameter: 37 cmNote: Fermenter air lock is not included.

Fermenter made of food grade plastic. Lid and rubber seal for air lock are included. Graded to 25L, 30L maximum.MeansurementsHeight: 44 cmDiameter: 37 cmNote: Fermenter air lock is not included.

Fermenter 30L with tap-hole and lid

Three Fermenters 30L with tap-hole and lid

Fermenter 30L with lid and tap with barb.Height: 44cmDiameter: 37cm

Three Fermenter buckets 30L with lid and tap with barb.Height: 44cmDiameter: 37cm

Plastic lid for 30L fermenter with rubber bussing. ca 36cm diameter.

Steel handle for 30L Fermenter. (Fermenter not included)

3-piece airlock in transparent plastic that fits ordinary plastic fermenters as well as FermZilla and Brewly fermenters. Easy to clean. Fits 9mm holes.

Better Brew Airlock 3 bubbles, fits in standard grommets for standard fermenter buckets. An essential piece of homebrew kit. This Bubbler Airlocks fits into drilled bungs and grommets. Designed specifically for homebrew.It lets the CO² pressure out without letting contamination back in.Just partially fill with water and you're done.

Better Brew Airlock Straight, fits in standard grommets for standard fermenter buckets. An essential piece of homebrew kit. This Bubbler Airlocks fits into drilled bungs and grommets. Designed specifically for homebrew.It lets the CO² pressure out without letting contamination back in.Just partially fill with water and you're done.

Spiral fermenter air lock with red or yellow cap. 10mm diameter.

Fermenter tap with barb (9/12mm) with nut and rubber gasket. Fits holes 25-26mm diameter. Recommended silicone hose inner diameter for the nipple is 9-10mm.

Fermenter Tap Classic 3/4" with Nut and rubber gasket (1pc). Fits holes 25-26mm diameter. Fits rigid bottle fillers (not hoses) with ca 11mm diameter.

Better Brew Lever Tap with Nut. With gasket. Fits 26mm holes in fermenters. Nozzle outer diameter is 11,5mm.

Rubber Seal for Airlock that fits 15L and 30L fermenters.

Hop filter in stainless steel, perfect for dry hopping beer in Cornelius kegs or fermenters. Loop for hanging it. Length: 18cm. Diameter: 7cm. Mesh size: 300 microns

Hop filter in stainless steel, perfect for dry hopping beer in Cornelius kegs or fermenters. Loop for hanging it. Length: 29cm. Diameter: 7cm. Mesh size: 300 microns

Thermometer LCD 2-36 degrees Celcius. Self-adhesive. Perfect for the fermenter. Size: 21x148 mm.

Brewly TC-320 Digital Universal Thermostat. EU-version power cord (UK power cord not included).

Inkbird ITC-308 Digital Temperature Controller Outlet Thermostat with Dual Screen Readouts, w/Sensor. For Home Brewing & Fermentation, Breeding & Incubation, Greenhouse, Kombucha.- Plug and play design, easy to use. - Support reading with Centigrade or Fahrenheit. - Maximum output load: 1100W(110V) / 2200W(220V). - Temperature calibration, Compressor delay protection for refrigeration control.- High and low temperature alarms are available. - Dual relay output, be able to connect with refrigeration and heating equipment at the same time. - Dual display window, be able to display measured temperature and set temperature at the same time. - Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.Specifications- Temperature Control Mode :On/Off Control, Heating and Cooling - Temperature Control Range : -40~100 °C / -40~212 ° F - Temperature Resolution: 0.1 ° C / 0.1° F ​- Temperature Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F) - Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F- Input Power: 100 ~240VAC, 50Hz/60Hz - Temperature Control Output: Max. 10A, 100V ~240V AC - Input Power Cable Length: 1.5m (5ft) ​- Output Power Cable Length: 30cm (1ft)- Sensor Type: NTC sensor (Including) - Sensor Length: 2m / 6.56ft ​- Sensor's probe dimension: 50mm x 6mm- Dimension Body: 140x68x33mm (5.5x2.7x1.3inch)- Socket (EU Version): 135x54x40mm (5.3x2.1x1.6 inch)

These 29L stainless steel vessels are designed just like a commercial beer keg but with a large 10cm (4inch) tri-clover opening at the top so you can easily get inside the keg to clean it out. This new 29L Size is perfect for doing 20-25L batches so you have a bit of spare head space inside the Kegmenter.This the stainless steel Kegmenter comes with airlock and flat plate however you can also use this kegmenter under pressure if you want to. If you want to use this Kegmenter under pressure then we would recommend that you purchase the lid with ball lock posts and pressure relief vale.The Kegmenter can hold 2.5bar which makes it possible to carbonate and ferment in the same vessel. You can force carbonate using the Pressure Kit (sold seperately).Being able to hold pressure also means you can push the beer out of the fermenter directly through a filter or even dispense directly from fermenter to draft beer tap if you wanted to.SpecificationsVolume: 29L (7.6 Gallons)Maximum Working Pressure: 2.5 BARTest Pressure: 5 BAR Wall Thickness (Body/Chimes): 1.8mm/2.1mmDiameter: 39,5cmHeight: 38cmMaterial: 304 Stainless steelDatasheetClick here to open the datasheet

This pressure kit is so you can convert the 29 and 58L Kegmenters into either pressure rated fermenters or use the Kegmenters as ball lock kegs. This lid comes with a red pressure relief valve (that opens at 2.5bar - compatible thread to cornelius type PRVs). The lid has accurately machined gas and liquid posts.This lid is ideally suited to also fermenting under pressure so you can use a spunding valve/adjustable pressure relief valve so you can naturally carbonate during primary fermentation.It should be noted that we now make this lid with a 60cm silicon dip tube with a stainless fload. This innovative design means when you draw liquid from this kegmenter the liquid will always be drawn from the top 2.5cm of liquid meaning only the clearest wort/beer will be drawn from the kegmenter. This is particulrly useful if you are dispending directly from the fermenter or simply want to separate clear liquid from sediment which has sunken to the bottom of the kegmenter.

Handcraft Supplies 25 L Stainless Steel Conical Fermenter is a high quality stainless steel fermenter which can be used to ferment up to 23 L of wine, beer, cider, and spirit washes. The Stainless Steel Conical Fermenter provides the perfect step up from plastic with the following features: 304 stainless steel build which is long-lasting, robust, and durable. It also makes cleaning and sanitising easier, which reduces the chance of off-flavours.Zero air-permeability walls and a lid with an air-tight silicone seal for reduced risk of oxidation or unwanted microbes entering your fermentation.Coned bottom for efficient trub collection, reducing the contact area with the yeast bed and the off flavours associated with sitting on dead yeast for too long (yeast autolysis).Rotating dip tube with ball valve tap for maximum and easy transfer, removing the need to syphon.Bung, airlock, thermometer strip also included for even greater value for money.  Whats included :  Stainless Steel Fermenter (25 L Capacity)Stainless Steel Fermenter LidThermometer StripAirlockBungValve & Dip Tube Assembly

The GF30 Coat is the perfect fitment for those in a climate that experiences high condensation rates when using either using the GC4 Glycol Chiller or Cooling Pump Kit to lower the fermenter’s temperature. Fits Grainfather Conical Fermenter.Features:Made from high quality 5mm thick SBR foam.Consists of two independent sections for both the main body and the fermenter cone for total coverage.

Temperature control is one of the most crucial elements for producing a good quality beer. It needs to be regulated and stable throughout the whole fermentation process to ensure the yeast doesn't get stressed and ferments correctly to get the right flavour profile. The pump can handle cold water and glycol.To be able to cool with the Grainfather Conical Fermenter, you need to have the Conical Fermenter Temperature Controller. Then once your target temperature is below the temperature of the wort in your fermenter the Cooling Pump Kit pumps ice cold water or Glycol through the double walled insulated interior to cool down your wort. Simply connect the couplers and insulated hoses to the Conical Fermenter, submerge the submersible pump into a cooler box with water (add ice for your required temperature) and pump the liquid through the insulated cooling sleeve of the Conical Fermenter body.- Conical Fermenter Cooling Pump (submersible) that can handle Glycol.- T-section power connector.- 2 x brass couplers.- Rated 12 VDC – 4.8 Watts.

The Grainfather Digital Temperature Controller replaces the temperature display. With this you can control the heating and the cooling (if you have the Grainfather Glycol Chiller) of your fermenter by dialing in a temperature or even setting a temperature schedule (can set up to 5 stages). This snaps on easily via magnets and pogo pins with no extra cords or clutter.Control the heating element and Glycol Chiller (available separately)Choose between imperial and metric (C° & F°)Total of 4 fermentation profiles with up to 5 steps each (2 are pre-set for a lager and an ale, 2 are custom)Hysteresis is customisable and able to be set at 0.1 intervals between a range of 0.1°C – 1.9°C & 0.2°F - 2.9°F (the default setting is 0.5°C)

New version with touch panel (LED). Control your fermentation temperature accurately, every time! Temperature control is one of the most crucial elements for producing a good quality beer. It needs to be regulated and stable throughout the whole fermentation process to ensure the yeast doesn't get stressed and ferments correctly to get the right flavour profile. With the ability to individually power and control the temperature of up to four Grainfather Conical Fermenters, each with their own fermenting schedules, the Grainfather Glycol Chiller is the perfect addition to ensure superior fermenting results.Design:With a sleek and compact design, that still accommodates our full array of features, the Glycol Chiller maintains the Grainfather’s principle of providing quality home brewing equipment, that deliver’s craft brewery like results, on a small footprint. With the addition of the Glycol Chiller, your system is operating at the ultimate level and you are even able to cold crash and lager down to 4°C (39°F). The Glycol Chiller connects to a hidden cooling sleeve, located in between the two stainless steel walls of the Conical Fermenter. Your desired temperature is dialed into the digital temperature controller on the Conical Fermenter, the liquid then travels through this sleeve, cooling the stainless steel which in turn cools the beer in the fermenter. The cooling sleeve never comes into contact with the beer, is completely concealed and does not need cleaning or sanitising - a true innovation for a fermenter on this scale.Features:- Allows you to cold crash 23 L (6 US Gal) of wort to as low as 4-6ºC (39-43°F). Minimum temperature will vary based on external factors such as ambient room temperature, the number of fermenters connected and other environmental conditions.- Cools and powers up to 4 Conical Fermenters at different temperatures and fermenting schedules.Note: The instructions for the Glycol Chiller will be attached to the outside of the shipping box. It is important that you retain these, do not throw them away and read them carefully before use to ensure no damage occurs to the unit. If these for any reason are not included with your purchase, we highly recommend you download a new copy via the instructions tab on this page and read them carefully.Glycol Chiller includes:- Wall outlet power cord with plug- 2 x cooling connection couplers- 2 x 2 m (6.5 ft) insulated hoses- 1 x Glycol Funnel- 1 x silicon tube for priming pump- 1 x 3 L (3 US qt) propylene glycolNOTE: When you receive your unit, you will need to fill it up with a propylene glycol mixture. Refer to the instructions provided with the Glycol Chiller for mixing, filling and pump priming information.Warranty:There is 24 month warranty for Glycol Chillers. Specifications:- Touch LED display panel- 6 L (1.5 US Gal) glycol tank- 300 W- 220 – 240 V, 50Hz- Noise level (operating): 50-60 dB- EU-version power cord (UK power cord NOT included).- 390W x 450D x 656H (mm)- Weight: 28.3 kg (62 lbs)InstructionsClick here to open the manual

Propylene Glycol Pure 1L 99,8%. Food grade. Can also be used with Grainfather Glycol Chiller for example. Volume 1L.

All you need is a C02 bottle and a regulator to attach to the Pressure Transfer and you can transfer your beer into a keg or bottles through the Conical Fermenter Dual Valve Tap or via the top of the fermenter lid using the Beer Racking Pipe.Package includes- High quality 304 stainless steel components- Accurate digital pressure gauge- Needle valve for precise control of pressureNOTE: Batteries are not included for the Pressure Gauge. 2 x AAA batteries are needed.

Glass jar 4L with lid and tap with many uses, such as: fermentation of beverages such as Kombucha, for cold beverages such as beer, cider, wine, juice, ice water or lemonade.Note: During fermentation, the lid must be slightly open, with eg. a muslin bag in between. The lid must be opened a little to make the tap work, this is due to that a vacuum is formed in the glass when the lid is on. Must NOT be pressurized.- Capacity: 4 liters- Dimensions (approx.): 27 x 16 x 16.5 cm (HxWxD)- With lid and tap.- Hand wash only.- Not for hot drinks.

Now with Tri-Clover Clamp for easy assembly and disassembly of the conical tank, Butterfly valve and harvesting container. No more difficult and complicated Butterfly valve. Now it is easy and simple to mount Butterfly valve with the Tri-Clover Clamp. See video below.FermZilla revolutionary design simplifies the home brewing process and minimizes the risks of infection and oxidation. Finally, you can brew your beer and dispense directly to bottles or drink it as draft beer – without touching the beer. You can carbonate your beer naturally in the FermZilla, or at your desired pressure with the optional pressure kit and the additional pressure release valve with gauge.Facts:27 L. Conical tankWorking pressure: 2.4 bar (35 psi)FermZilla Tri-Conical Starter kit Gen-3 - 27 L. contains:1 x 27 L. Conical tank with metal neck ring1 x Butterfly valve with Tri-Clover Clamps1 x 3" Tri-Clover Clamp1 x 2" Tri-Clover Clam1 x Reinforced stainless steel frame1 x Lidt with red pressure release valve 2,4 bar/35 psi, 2 x Male Cap Threads, with caps and the possibility to drill 4 ports for accessories1 x  600 ml yeast harvesting container with 2 x Male Cap Threads and caps.1 x Airlock1 x Stainless Steel Handle Assembly1 x Strip Stick On Thermometer1 x Level indicator sticker (Litres and Gallons)1 x Spare O-RingDo not expose to liquid temperatures above 55°C / 130°F or ambient temperatures above 35°C / 95°F.Warnings:Please read instructions thoroughly before use. The current version can be found in the 'instructions' tab above. We will not be held liable for misuse or mishandling of the unit contrary to the instructions.Do not expose to liquid temperatures above 55°C / 130°F or ambient temperatures above 35°C / 95°F.

Now with Tri-Clover Clamp for easy assembly and disassembly of the conical tank, Butterfly valve and harvesting container. No more difficult and complicated Butterfly valve. Now it is easy and simple to mount Butterfly valve with the Tri-Clover Clamp. See video below.FermZilla revolutionary design simplifies the home brewing process and minimizes the risks of infection and oxidation. Finally, you can brew your beer and dispense directly to bottles or drink it as draft beer – without touching the beer. You can carbonate your beer naturally in the FermZilla, or at your desired pressure with the optional pressure kit and the additional pressure release valve with gauge.Facts:55 L. Conical tankWorking pressure: 2.4 bar (35 psi)FermZilla Tri-Conical Starter kit Gen-3 - 55 L. contains:1 x 27 L. Conical tank with metal neck ring1 x Butterfly valve with Tri-Clover Clamps1 x 3" Tri-Clover Clamp1 x 2" Tri-Clover Clam1 x Reinforced stainless steel frame1 x Lidt with red pressure release valve 2,4 bar/35 psi, 2 x Male Cap Threads, with caps and the possibility to drill 4 ports for accessories1 x  1000 ml yeast harvesting container with 2 x Male Cap Threads and caps.1 x Airlock1 x Stainless Steel Handle Assembly1 x Strip Stick On Thermometer1 x Level indicator sticker (Litres and Gallons)1 x Spare O-RingDo not expose to liquid temperatures above 55°C / 130°F or ambient temperatures above 35°C / 95°F.Warnings:Please read instructions thoroughly before use. The current version can be found in the 'instructions' tab above. We will not be held liable for misuse or mishandling of the unit contrary to the instructions.Do not expose to liquid temperatures above 55°C / 130°F or ambient temperatures above 35°C / 95°F.

FermZilla Hop Bong is a versatile accessory, capable of pressurized dry hopping and oxygen purged hops into fermenters. And also as an inline carbonation/oxygenation accessory.Capacity in Hop Pellets:150g to 180gNamed purely on its looks and not its function. The Hop Bong is a versatile pressurizable tri-clover accessory, capable of not only dry hopping oxygen purged hops into fermenters. But also as an inline carbonation/oxygenation accessory.This is a completely new pressure pack for the basic FermZilla Tri-Conical and All Rounder Fermenters with the new 2" Tri-Clover Adapted Pressure Lid.Constructed from Nylon 12: An autoclavable, extremely robust, and chemical resistant engineering plastic.Includes:1 x KL05333 Red 35psi PRV1 x KL20176 PCO1881 PRV Cap1 x KL23627 - PCO1881 Male x 2 Inch Tri-Clover (POK)3 x KL03438 - 2 Inch TC Clamp Beaded Seal3 x KL03322 - 2 Inch TC 2 Segment Clamp1 x KL26079 - 2 Inch Hop Bong1 x KL10788 RED Multi Gas Post Plastic Carbonation Cap1 x KL27564 - 2 Inch x 2 Inch Butterfly Valve1 x KL22569 Yellow 17psi PRV1 x KL35965 - 4 Inch TC Pressure Lid with 2 Inch TC PortPlease note that the Hop Bong is not made from glass. It is made from special engineering plastic.

Add this pressure kit to your FermZilla 27L, 35L or 55L and turn your FermZilla into a true uni tank that can be used for carbonating beer. This inexpensive upgrade will truly show you what the FermZilla was designed for. Here are some possibilities:Fermenting Under Pressure:First one of the most intriguing uses is to ferment under pressure which reduces ester production and fusel alcohol production. That means that you can ferment warmer than you normally would, even making lagers at room temperature. Most commercial beer is fermented under pressure just due to the size of commercial tanks and the pressure that is created by the column of beer. It is one of the differences between commercial brewing and homebrewing. The lid has a built in relief valve that will blow at 35psi and we strongly recommend you also purchase an adjustable pressure relief valve, or blow tie kit, that allows you to set a lower pressure. It is also always a good idea to have two relief valves on the FermZilla anytime the unit is under pressure. Carbonating, Pushing, and Serving:When you are fermenting under pressure the beer is already carbonated when you are done fermenting. You can control the level of carbonation by using an adjustable pressure relief. The idea is that the FermZilla can eliminate kegging and you can serve directly from the fermenter. We love this idea but there will probably still be times that you want to keg. Use a beer line to connect the FermZilla to your keg and enjoy the easiest kegging experience ever. You can also choose to send carbonated beer through a beer filter on the way to your keg. When applying pressure with a CO2 tank also make sure that you have a functional relief valve on your CO2 regulator. Lack of OxidationBecause the beer always has a CO2 blanket through fermentation and during any transfers out, oxidation is eliminated. When you cold crash you won't be sucking air back in through an airlock. Key Features:• Ferment beer under pressure to reduce ester and fusel alcohol production• Ability to always draw clear beer with the unique, floating draw tube • Keg already carbonated beer• Use co2 to push beer into a keg or though a filter into a keg• Carbonate and serve beer directly from the FermZilla, eliminating kegging all togetherFermZilla Red Plastic Pressure Kit includes:- 2 x Carbonation Screw Caps with barb- 1 x FermZilla 27L, 35L & 55L SS Floater & 60cm Silicone Dip Tube

The filter prevents hop residue etc from beeing sucked up into the silicone hose of the FermZilla Float. Made from HDPE and 304 Grade stainless steel this product can be boiled or sanitized with most detergents.The float can be mounted in three different places on the filter, to determine how close to the surface you want to suck up liquid.Dimensions: 40.5 x 27 mm. Hose holder diameter: 7.20 mm, perfect for 6mm inner diameter silicone tube/hose. Materials: Stainless steel and plastic. design may vary.

Fits CO2/Beer Ball-lock-coupling. Sanitize hoses or force carbonate beer on PET Bottle. Also fits FermZilla. Clean your beer line easy. Attach the cap to a soda bottle with cleaning solution. Liquid and Gas ball lock compatible. Stainless steel.

Fits CO2/Beer Ball-lock-coupling and has 1/4" (6,5mm) stem. Sanitize hoses or force carbonate beer on PET Bottle. Also fits FermZilla. Clean your beer line easy. Attach the cap to a soda bottle with cleaning solution. Liquid and Gas ball lock compatible. Red plastic.

Fits CO2/Beer Ball-lock-coupling and has 1/4" (6,5mm) straight stem. Sanitize hoses or force carbonate beer on PET Bottle. Also fits FermZilla. Clean your beer line easy. Attach the cap to a soda bottle with cleaning solution. Liquid and Gas ball lock compatible. Yellow plastic.

Turn your soda bottle into a smart growler quick and easy! Mount either a plastic or metal line cleaning & carbonation cap to the tee piece. Afterwards you are able to connect both a Co2 and liquid ball lock at the same time, so you can take a regular soda bottle and turn it into a growler.Note: This is for the tee piece only, you need to buy the remaining products seperatly.Do not exceed 4,5 Bar/ 65 Psi

This yeast collection container can fit the FermZilla fermenters and is primarily used for collection and addition of hops and yeast via the butterfly valve. NOTE: One yeast collector is already included in the FermZilla Kits.This collection container can also be used for yeast starters meaning that you can create the yeast starter in this collection container directly then attach to the valve of the FermZilla so you can pitch yeast without needing to open the lid. This collection container has been designed to work with the magnetic stirrer machine.The ports on the side of this collection container are the same as a standard coke bottle or soft drink bottle. The threads are designed to suit the stainless carbonation caps. These carbonation caps will enable you to purge oxygen for dry hopping, attach carbonation stone and carbonate liquid in the FermZilla, oxygenate wort and are useful for many other reasons.FermZilla Yeast Collector 1L features:- This collection container fits all the FermZilla conical fermenters.- The clear body is made from Tritan from Eastman Plastics. This heat tolerant plastic is BPA, and plasticiser free.- The Lid is made from impact resistant HDPE.- Both lid and body can handle boiling wort.- Height: 150 mm- Diameter: 115 mm- Capacity: 1L