Accessories

Patent Bottle Cork (Swingtop) with Gasket - Plastic 12-pack

Patent Cork Washer Red Rubber 6/22mm (Swing Top gasket). 22mm outer diameter and 6mm hole in the middle. note: 1pc washer

20-pack Patent Cork Washer Red Rubber 6/22mm (Swing Top gasket). 22mm outer diameter and 6mm hole in the middle. note: 20-pack washer

Silicone washer for patent corks White/Transparent or black. 40mm outer diameter and 16mm hole in the middle.

White/natural Silicone washer for patent corks White/Transparent. 22mm outer diameter and 6mm hole in the middle.

Pump Auto siphon 33cm with 1,5m tube with holder and clip.

Pump siphon 44cm with 1,5m tube, holder & clamp. Auto siphon.

Pump siphon 45cm with 1,2m tube. Auto siphon. Note: Clip and clamp are bought seperately.Length: 45cmDiamater pipe: 20mmLength hose: 120cmDiameter hose: 12mmInner diameter hose: 9mm (3/8")

Clamp/holder for the Pump Siphons. Keeps them steadier when used with a fermenter. Black plastic. Fits all pump siphons with around 23mm diameter.

Pump siphon Gasket for 33 & 44cm (spare part). Hard plastic, fits 23mm pipe.

Stainless steel Pump siphon 44cm with 1m silicone hose and holder. Auto siphon. Total Length: 50cm. Hose Inner diameter: 9mm (3/8")

This blow gun is easy to use to replace the air in fermenters, kegs or bottles with CO2 before they need to be refilled. Carbon dioxide is heavier than oxygen, which means that the oxygen is displaced and the risk of oxidation of the beer is reduced. The blowgun fits directly onto a 425g SodaStream-type carbonation cartridge without an additional adapter. Press the trigger to blow CO2 from the carbonation tube. Fits 3/8" hose. It can also be used instead of a regulator in a draft beer plant. The gun has a safety valve that triggers at 1 bar. This is a good serving pressure for most types of beer. When the safety valve beeps, you know that the pressure in the barrel is 1 bar.Please note that the gas tube, hose and barrel coupling are not included.

With this stainless steel counter pressure filler, you can pour beer and other beverages directly into bottles from kegs without foaming, exposure to oxygen and loss of carbon dioxide. Fits most types of bottles. Duotight compatible.The bottles are filled from the bottom in an oxygen-poor environment because carbon dioxide builds up a back pressure in the bottle before the beer is released. Works best with cold liquid and with a pressure between 0.6 - 1.1 bar.For cleaning, use an alkaline cleaner (PBW or Chemipro OXI) and flush the bottle filler according to CIP (Clean In Place), then rinse through the back pressure filler with water.Then use a disinfectant (Sanipro or Star San) before use.Connect the CO2 hose from the regulator on one side and the beer hose on the other side.Back pressure filler for bottles- Hose nipple size: 5.5 mm on both nipples.- Bottle size: at least 22 cm high with a bottle neck diameter of 14-20 mm (for taller bottles, the range of the back pressure filler can be extended with a piece of hose).- Main valve with three positions: Co2 IN - switched off - beer IN.- Silicone plug 22/17 mm included.- Manufacturer: KeglandInstructions:Click here

BeerGun V1 with comfortable pistol grip is used for bottling carbonated beer directly from barrel to bottle. Fills from the bottom with minimal foam and the pressure is automatically reduced without the flow becoming turbulent and causing foaming. Contains hose and nipple 1/4 "MPT - 1/4" MFL. Connect your drum to the T-coupling for gas, from there to the carbon dioxide tube at one end and the beergun at the other. Use reinforced carbon dioxide hose. Put your beergun in the bottle and press off. The bottle fills smoothly without turbulence or foaming. Complete with ball coupling or bayonet for beer connection, and with gas connection (T-coupling 1/4 '' and eg reinforced plastic hose 6mm with hose clamps, or PE hose 3/8 '' hose with JG 3/8 "- 3 / 8 "- 3/8" T-coupling)

This clamp-lock is designed for dispensing drinks into the short neck crown cap bottles (AKA “Baviera” bottles) with standard crown caps of diameter size 1.02 in. Fits all iTap and iTap2 devices.- First of all, the clamp-lock fits all iTap devices - Lowers the costs on glass beer bottling equipment, since you can use the same tap various bottles- Allows to expand the product packaging options- Produced from high-quality food-grade materials- No disposable removable parts- Easy and convenient use of counter pressure bottle filler- Warranty service- The best ratio of price vs quality

Carbonation Drops are a convenient alternative to priming sugar. The dosage required is 1 drop per 330-375 ml bottle or 2 drops per 740-750 ml bottle. Each bag contains at least 60 tablets, which corresponds to approx. 3g of sugar/tablet.Advantages:- Simple dosing- Solved quickly- No mess- No measurement- No spillageDosage suggestions for common bottle sizes:1 tablet for 330-375 ml bottles1.5 tablets to 500 ml bottles2 tablets for 740-750 ml bottlesIngredients:Cane sugar (sucrose), dextrose (glucose).

Double iTap draft beer tower- For 2 iTap dispensers- Holes to hide all the tubes and hoses- Professional look

Double iTap draft beer tower- For 2 iTap dispensers- Holes to hide all the tubes and hoses- Professional look

Double iTap2 draft beer tower- For 2 iTap2 dispensers- Holes to hide all the tubes and hoses- Professional look

Double iTap2 draft beer tower- For 2 iTap2 dispensers- Holes to hide all the tubes and hoses- Professional look

G-connector with a compensator to pour the drinks through a defoamer to a mug, connects to iTap or iTap 2.

iTap PRO is the perfect "all-in-one" solution for homebrewers have to bottle higher volumes or Microbreweries. Fills any glass bottles and growlersFits for bottles with various height and bottleneckCounter pressure method keeps the beer taste and carbonation for up to 90-120 daysProtection from bottles explosionMax capacity 180 bottles per hour1 year warranty serviceEvery device has a passport with serial number

A set of spare parts for iTap maintenance.