The Measuring Kit comprises of a Hydrometer and a Measuring Cylinder 100ml.

Cornelius keg 18-liter (5 gallons) with ball lock and protective rubber around the ball couplings and at the bottom. High quality from Italy. Material: Stainless steel and rubber.NOTE! Used kegs. The kegs are in very good condition, washed. Delivered pressurized. Minor signs of use may occur. There may be a mark on the barrels and the rubber in the handle may be a little dry and in some cases discolour slightly (rubber preservative or vinyl gloss can remedy this).Note: Keg looks and design may vary, pictures are to illustrate only.Height: approx. 565 mmDiameter: about 232 mmWeight: about 4.5kg

Inkbird Digital Thermometer with foldable stainless steel measurement probe. It has a temperature range of -50°C to 300°C with ±1°C accuracy and ±0.1°C resolution. Good for measuring food, liquids, pastes and semi-solid materials.The thermometer reads temperature readout within 4-7 seconds with the thin food grade stainless probe tip. Portable carrying and hanging: Easily hold the thermometer with the friendly arc tail design. Easily storage with the space saving design(180 degree probe rotation) and the magnetic design on the back of the device could be adsorbed on steel material strongly. - Fast Readout within 4 - 7 seconds with an accurate temperature reading- Ultra-clear screen LCD display- Safety and cleanliness with the foldable probe design- Precise reading with the step-down probe design- Hold on the temperature reading before withdrawing the probe from the food.Inkbird HET-F001 Digital Food ThermometerSpecifications:Temperature Range: -50°C to 300°CDimensions: 6.69 x 1.43 x 0.63 inches/170 x 36.2 x 16mmTemperature Accuracy: ±1°C from -20 to 200°CWorks for Meat, Grilling, BBQ, Oven, Candy,Liquid, Milk, Smoker, and so on.Battery: 1 x AAA battery (NOT included)

Star San is a high foam, final acid anionic rinse for sanitizing equipment. It contains a blend of phosphoric acid and dodecylbenzenesulfonic acid. This synergistic blend is unaffected by excessive organic soils.Star San is also a self-foaming acid anionic detergent. It can be applied through a foamer to produce self-adhering foam or manual application. Cleaning with Star San on a daily basis will leave equipment in an acid condition that will eliminate water spotting, mineral build-up, and corrosion. Dosage: 15 ml per 10 liters of water.Contact time: 3 minutes.

Brewly 70L is an efficient, compact half-automatic brewery for up to 60L batches with Whirlpool, Hop Spider, Wort Chiller with gardena-type connectors and mesh screen bottom hop filter.News:- Brewly SS500 Hop Spider is included- Brewly Stainless Mash Paddle 60cm is included- New improved malt basket allows more open wort flow to reduce risk of stuck mash.- New large surface heating element reduce risk of burn-ins.The Brewly brewery opens up a world of possibilities to brew great craft beer with friends and family, and experience the pleasure to make beer at home that tastes as good as it does from a professional brewery.Mashing, lautering/straining, boiling and cooling takes place in the same pot. The mash is pumped around and heated according to the RIMS method. The Digital Controller provides simplicity in entering temperatures, times and power for both mashing and boil. Up to 9 mash steps and 9 hop/spice steps per recipe, and the memory can store up to 9 recipies.The malt is placed in a stainless malt basket with a perforated insert. The malt basket can easily be lifted in several steps for lautering/straining, and the insert can be adjusted seamlessly to fit the malt bill, thanks to a telescopic overflow-pipe.A polycarbonate sight glass lets you see the wort/beer volume up to 60L, and there is also a volume scale inside.A stainless Whirlpool tube is also included, making it possible to create a whirlpool in the wort which increases volume efficiency and speeds up the cooling of the wort.Note: Effective brewing volume is 20-60 liters.Brewly 70L Brewery with Chiller, Hop Spider, Paddle & Whirlpool- Material: Polished stainless steel (AISI 304)- Chiller: 13m stainless Cooling Spiral with gardena-type fittnings for easy connections- NEW! Brewly SS500 Hop Spider (500 mesh)- NEW! Brewly Stainless Mash Paddle 60cm- Whirlpool: Stainless Whirlpool tube with CAM-lock-connector- Adjustable flexible recirculation tube with CAM-lock-connector- Bottom filter: Mesh-screen bottom filter for efficient separation of hops from the wort.- Brewing volume: 65 liters (recommended max)- Total volume: 75 liters- Power: 3500 W, adjustable in 100 W steps. 16A fuse is needed. The heating element with new larger surface is placed below the bottom to avoid wort caramelization.- Malt basket: Can easily be lifted in several steps for lautering/straining, and the insert can be adjusted seamlessly to fit the malt bill, thanks to a telescopic overflow-pipe. A Grainstopper avoids malt dropping through during mash-in. Max recommended malt weight is 15 kg.- Digital Controller with memory to store up to 9 recipies with up to 9 mash steps and 9 hop/spice steps each. Choose between Automatic Mode and Manual Mode with alarms and reminders.- Temperature range 25°C to 100°C, adjustable in 0,1°C steps.- Temperature control up to 100°C, with +-1°C accuracy.- Powerful magnetic centrifugal pump with seperate control. Max flow 12 liters per minute.- Tap with Bazooka mesh screen filter- Height: 69 cm (without lid and recirculation tube)- Diameter: 40 cm (without handles and tap)- Weight: 12 kg- EU-power plug (UK power plug not included)- 220-240V 50/60Hz- Instructions Manual in EnglishMash water calculation:mash water in liters = (amount malt in kilos * 2,5) + 10L.Note: 2,5 is the ratio between water and malt, ie how thick the mash is going to be. This ratio can be varied between approx 2,2-3. 10L is the volume of water below the malt basket inside the brewery.Example: For a 20L recipe with 6kg malt the mash water calculation is as following: 6*2,5+10 = 25L.Sparging: For a 20L recipe, sparge with 78-degree C water up to the 25L mark, and then start the boil (you may start heating the wort while sparging to save time).

Heat insulation for the Brewly 70L brewery. Provides faster heating, more vigorous boil and reduces energy consumption. Material: 5 mm neoprene foam.

Brewly 40L Sparge Water Heater is a 2500W thermostat controlled heater for quick heating of sparge water - HLT (Hot Liquor Tank). This sparge water heater has the same ball valve tap as the Brewly Breweries, a stainless steel quality product.Brewly 40L Sparge Water Heater (SWH40):- High quality 304 grade stainless steel construction- Stainless steel lid- Stainless steel ball valve outlet- Heavy duty handles for safe lifting- 40L total capacity up to brim- Internal volume scale up to 35L- Concealed 2500W electric heating element for easy cleaning- Precise electronic temperature control via display, +/- 1°C- Thermostat setting 30-110°C (110°C for max output).- 2000 W heating element for quick heating- Automatic overtemp cutout and overheat protection for max safety- 230V power supply. EU-version power cord (UK power cord NOT included).- Needs 13-16A fuse.